Hello everybody, I would like to start this thread to collect some ideas on how to improve the 2.0 version. I just received mine about a week ago and after some playing with the unit, I found areas for improvement. 1: I like the little screen that has some cool features and internal memory too. I …

Recognize that the computer and the printer may not be in the same location. If I am connected via WIFI I still should be able to make adjustments from the pad without having to disconnect. I should be able to pause a print and unload/load filament from the pad. I should be able to look at the curr…

Improvements on Tool changes - the heated bed ist assembled by 22screws to the base plate the laser diffuser by 14screws. Thats seems for me a bit too much just to make a little laser work from time to time. Why not use the magnetic attachment of the print bed to fixture the laser diffuser just on t…

Yes [image] Easy way to switch build plates Snapmaker 2.0 If you change between 3D, laser, and CNC with any frequency, it’s a bit of a pain to do all those bed screws. Haven’t seen this rather obvious solution posted, so: Get some of those thin ‘refrigerator magnet’ strip…

Hello all, Thank you for setup this item. I have joined the user of A350 in last Dec. My requests after network bug fixed are I want to use “fixed IP-Address” setting for A350 rather than “dynamic IP-Address (DHCP)” To show the A350’s IP-Address on the top page of the touchscreen display. It ma…

BTW, at least I find you only need to authorize the first time the snapmaker is turned on. Disconnecting and reconnecting afterwards doesn’t require it until it’s been power cycled.

Important Don’t req screws to change toolhead. Especially with enclosure. Is a pain to get around the back. Some kind of cam’d release would be sweet. Sensors and automation to determine material thickness. Fast way to get to a position near the open side of enclosure and half-way down when I am c…

Thank you for your suggestions. I will forward these advices to our product manager. Edwin

I’ve had the machine for a bit, primarily using it for CNC, so I can’t really comment on the laser or 3D printing configurations just yet. I’ve built a few other small to mid sized cnc routers since 2009 and my comments will be based on my experience with machines like this. rigidity. I am floore…

@LukeGary the E-Stop module still isn’t a true interrupt. It’s just another module sending an additional command to the controller telling it to do something, relies on code to work properly. Too many things can go wrong with code and I foresee issues eventually where it doesn’t function correctly a…

I know a jog wheel is in the works (release date TBD), but it would be nice to be able to adjust the “rapid” travel speeds no matter what mode you are in. When running boundary as well as having the machine go to home, having the tools travel speed at 100% can be dangerous and can potentially cause…

Snapmaker 2.0 improvements

Snapmaker 2.0 (3-in-1) Snapmaker2.0 Troubleshooting guides

brvdboss February 27, 2021, 6:49pm 4

Yes

The second one is my own design (still finalizing) but has been working really well so far.

Topic		Replies	Views
A350 Issues and Suggestions Snapmaker 2.0 (3-in-1)	24	8504	August 30, 2022
Discussion of Snapmaker 2.0 Firmware Updates Snapmaker 2.0 (3-in-1)	769	50916	July 26, 2025
How long do you plan to use your Snapmaker machines? Snapmaker 2.0 (3-in-1)	6	601	November 26, 2024
FEATURE REQUEST: Web Based Control Interface (Remote Control) Snapmaker 2.0 (3-in-1)	30	6547	November 29, 2024
Firmware request J1/J1s IDEX	28	2100	May 5, 2023

Snapmaker 2.0 improvements

Related topics