TPU printing of parts

Snapmaker 2.0 (3-in-1)
1

I have been using my A350 for a year now ,

I am now experimenting with TPU , I have used the snapmaker 95A TPU filamant and it has been working well with he default parameter my only issue is that it is too hard

I am restoring very rare antic car and you cant find any rubber parts for them , especially light seals, grommets etc .

I have seen that there is a new material call morphlex , that is 95 filamant but turns to 70 A once printed , but back order

I have also seen the foamy TPU as well as 85A TPU ( but might be too soft )

anybody used any of those on the snapmaker unit

2

I have not tried printing TPU, but I have seen people successfully print softer TPU by printing an adapter for the extruder, like this one:

There is also a lot of other useful information about printing TPU in that thread

1 Like
3

well , i bit the bullet and bought a roll of the morphlex

i used the defaut printing parameter set on my A350

it printed the parts first time no issue ( a car flasher seal )

it is definitely softer that standard TPU