1) Really needs to be able to heat the bed faster. It takes 5 minutes to come up to temperature. (at least start the bed heating before doing the quick-calibration) 2) I've had issues with the Full Calibration going wrong, and pressing HARD down on the bed. There is no way to abort a calib…

It appears to ignore all heating commands until after the calibration run. I have asked for the source as required by Marlin but have not received any further info to date.

I’m currently printing up the " Parametric Auto-Rewind Spool Holder" and plan to use it on the existing Spool stand on my A350.

This the reply from David Chen: Really appreciate your feedback. Really helpful. We plan to open source Snapmaker Luban in near future. Then you can join the development in a more interactive way. Besides, github issue list. We will also have discord channel for more instant communication. Pleas…

I have all same of those 10 issues. Commenting to say connected to problems and solutions.

Is your backlog visible publicly? :smiley: No is a fine answer; just curious.

I have a serious issue which sporadically happens at the end of a print: Nozzle stops at its last position Display shows disconnected, reconnect fails Bed Temperature is running away Especially the last one I think is serious.

Good to know that you already join forum, We haven’t had enough people to maintain a heathy discord channel. So that Let’s starting from discussing in forum. Hope you understand that. @CasaDelGato Snapmaker Luban will be open source soon, so that we will utilize the github to manage bugfix and fe…

@whimsycwd thanks for the response. Do you have a list of the outstanding bugs that you can share?

Send you some requests via forum. Looking forward to your reply.

We need to add the z calibration to all the tool head functions like the prusas are using. basically the z needs to move up to the full height and try to go past full z then the z is level. A few things i noticed in the cnc which is the only thing i have noticed. on the touch screen i cannot adju…

A350 Issues and Suggestions

Snapmaker 2.0 (3-in-1)

xchrisd September 5, 2020, 9:07pm 23

Have a look at this:

And this:

Topic		Replies	Views
Discussion of Snapmaker 2.0 Firmware Updates Snapmaker 2.0 (3-in-1)	770	47940	July 26, 2025
Snapmaker A250 3D printer breaks on contact with a heat bed during printing Snapmaker 2.0 (3-in-1)	23	2314	December 25, 2020
Beta Snapmaker review Original (3-in-1)	25	2012	December 2, 2017
Snapmaker 2.0 Freezing Mid-print Snapmaker 2.0 (3-in-1)	42	3366	February 3, 2021
Snapmaker 2.0 improvements Snapmaker2.0 Troubleshooting guides Feature-Request , Bug-report	34	3399	June 16, 2024

A350 Issues and Suggestions

Related topics