Help me understand this please! During stage home and or print completion, there’s 40 to 70 mm of interference with the front folding door. Upon completion of a print the bed final action is to advance the print forward. I had to open the side door and lift the A350 off and back from the leg support…

A350 Front enclosure interference at start and end of run

MooseJuice January 4, 2021, 5:27pm 3

Take a look at this post about the installation manual and let us know if you have it right or wrong

Topic		Replies	Views
A350 Bed rises and falls even during slow speeds Snapmaker 2.0	15	2161	June 10, 2020
Bed levelling problem right from the box Snapmaker 2.0	12	683	December 19, 2020
Z-Axis Linear Module Getting Started	2	281	January 25, 2021
A350 homing hits enclosure door 3d printing Snapmaker 2.0	10	1112	March 11, 2021
Snapmaker 2.0 A350 - new modules upgrade - linear modules locked? Snapmaker 2.0	8	1128	July 11, 2022