Here is a video. Watch the corner against the Z arm, and it’s quite noticeable it goes up and down. Am I the only one seeing this?

Hey @NilartPax , no my SM2 works perfect, you checked the bed screws from below? It’s important that assembled carefully, and step by step. Then, update the firmware V1.7.1.1 and take the newest Luban 3.4.2 software. And let us know. Sorry when my english isn’t perfect. check all taht things, i…

No, everything is updated. The screws are tight. The rotation occurs even on the baseplates of the linear module.

then subscribe it to the support, they will send you a new Linear module. Make a video just with the Linear module.

I’ve sent an email to support. @JKC20 @parachvte

Good morning, I have exactly the same issue on my A350, it’s noticeable when the bed is changing direction, if you have a look at the furthest point on the bed, you will see the point rising and falling on any direction change. It looks like it’s a minor play on the linear module which is amplifie…

They had me disassemble some stuff and try to wiggle the module brackets. There is a small click in one of them, but they said it was okay. I’ve reassbled it now, and honestly I’m trying to crank out PPE for people in my area so I just cut the number of things I was printing in half, to make it wo…

Oh, and use @Tone 's leveling methodologies in this excel spreadsheet. It can really help: [image] SM2 Bed Leveling 101 Snapmaker 2.0 I’ve been working on the problems with SM2’s bed leveling issues for a while now. I’ve created some Google Sheets that can help with the …

This issue + bed levelling + noise … It’s a lot of issues for a single machine we’ve paied good money for … My bed is almost ruined because of bed leveling issue, i hope Snapmaker team will find the root cause and fix it in the next firmware because it’s now a 2.5 in 1 machine. Cheers

Yes I feel your pain. I like the sound, though it operates in a room with a closed door. It’s nice to be able to hear that it’s done! haha. But I agree on the other two points. Contact support, maybe you will have a problem, or maybe it will be less bad after reassembly?

I have just sent an email to the support, hope it will be just a matter of tightening a hidden bolt somewhere in the linear. I need to continue to print face shield for medical people over here!!!

A350 Bed rises and falls even during slow speeds

Snapmaker 2.0 (3-in-1)

NilartPax April 24, 2020, 5:53am 8

Oh, and use @Tone 's leveling methodologies in this excel spreadsheet. It can really help:

Topic		Replies	Views
Bed levelling problem right from the box Snapmaker 2.0 (3-in-1)	12	741	December 19, 2020
New A350T EXTREME Bed Wobble Snapmaker 2.0 (3-in-1)	12	1113	February 14, 2023
Linearmodul works only one Week Snapmaker2.0 Troubleshooting guides	34	2307	November 27, 2020
A350 Y-modules making weird sounds, H. bed moving up and down Snapmaker 2.0 (3-in-1)	13	820	November 12, 2021
Brand New A350 with broken linear module Snapmaker2.0 Troubleshooting guides	3	1029	October 17, 2020

A350 Bed rises and falls even during slow speeds

Related topics