Should be fine. I got these: http://a.co/c0SyYHn which yes looks like more/less a “standard” type. I did hear from support and the 100K ohm ones are correct.
Type: NTC
Value of resistance: 100k
B value: 3950
The other end should be XH2.54 with 2 pins
Be aware: the ones i got at least did not have the same connector as the one in the 3d module. It works, but be careful with the wrapping because the connection won’t “click” in place. There is a fair amount of room to wrap up the rest of the cable inside the module, just again be careful!