Rotary Module Loses Origin

[Skreelink]

Thanks, here’s the tutorial I did on multiple passes on the rotary module:

Multi-Pass Rotary Guide

Haven’t found a good guide, so after some extensive testing and finally managing some good results, I figured I’d make a guide on how to do multiple passes using Luban. Please read the entire guide before starting, it seems daunting, but once you get through it once or twice, it’s quite simple. Disclaimer: I am in no way responsible for any possible damage to your machine or materials, although risk is very minimal if you follow along exactly as I am going to include images of my settings, setu…

I’ve also done a tutorial on how to make a repeatable setup for the laser:

Accurate, Repeatable Laser Guide

My rotary guide (found here) seemed to be well received, so I’m going to move onto the laser. This guide will be a bit shorter, as it’s not too involved, but is mostly to help increase repeatability, accuracy, and quality of your laser projects. Likely any machinist will say a repeatable, accurate origin is a key component in quality production. You gotta know exactly where you start to know where you’re gonna end right? I know the snapmaker method is just eyeball it, be it with a mark and lini…