So I’ve made 3 attempts to make these little candlesticks. All three attempts it gets to about 30% and the machine loses its mind and starts stabbing. The rotary tool stops spinning. I guess the file is too big for the machine to handle? The third attempt I pulled the plug and let it recover from po…

Almost certainly the spindle motor being overloaded.

Maybe make it three jobs. Try and do material removal passes. No detail at all just reduce the profile in a couple runs. Then final job of what you have there (full detail).

May try some tips form here. [image] Is it possible to CNC something with 25mm depth? Snapmaker Original I am trying to CNC a half cylinder. First time using the CNC. Does anyone know if this is possible? I saw on the forum max depth is 15mm but want to confirm that. Th…

These would help thanks, but I’ve given up - I’m going to 3D print the candlesticks. Next time I’ll try these methods.

Rotary attempt Woes

Snapmaker 2.0 (3-in-1)

clewis September 6, 2022, 11:20pm 5

Have you seen @Skreelink 's Rotary Multi Pass guide?

Topic		Replies	Views
Is it possible to CNC something with 25mm depth? Original (3-in-1)	2	695	August 29, 2022
Rotary Module Model Suggestions? Snapmaker 2.0 (3-in-1)	0	449	May 8, 2021
CNC carving head stopped working :( Original (3-in-1)	9	3093	February 7, 2019
Using any-shaped material with a (Snapmaker) rotary module Showcases & Tips	10	3650	March 16, 2022
Custom kitchen accessories Showcases & Tips	7	1078	November 26, 2020

Rotary attempt Woes

Related topics