Probleme mit pla druck

[xchrisd]

Servus,
ich denke das du als Primärproblem Unterextrusion hast.
Google mal Extruder kalibrieren oder sehe hier nach:

Summary: Extruder calibration a must

The topic known as: has become very useful to point people to so that they can calibrate their e-steps. However, that topic has become a bit large and overwhelming for a newcomer. So I’m starting this topic as an easier alternative to refer people to. Please continue to use the original topic for any discussion or questions so that we can keep this thread lean & mean. Here are the steps for calibrating the extruder on a Snapmaker A150, A250, or A350: On the touchscreen, swipe left and tap …

3d Print Guide_Walk Through

First of all, congratulations to a great machine! If you have any suggestions to this topic, feel free to send me a PM! You are new to 3d printing?- Be patient. The whole thing is very complex and just little adjustments will make the difference from failed to pretty prints. Start with easy, little things to create (1-3hours i would suggest) . Going to print the first time and then getting a 24h print on, maybe failes. There is a lot to learn, if it didn´t work for a long time, cool off a bi…