Alles zusammengebaut, 3 mal kontrolliert! Netzteil eingeschaltet, nichts geht! Strom kontrolliert, i.o. Modell snapmaker A350T!

Could you add more specifics? By nothing works, do you mean that machine doesn’t move? That the touchscreen doesn’t turn on? Do the power supply’s lights turn on? A better description and/or pictures would help with troubleshooting. Also, in the future, your machine would fall under the “Snapmaker …

Danke für Ihre Antwort. Habe den Fehler gefunden ! Danke auch für den Tip Snapmaker 2.0! Liebe Grüße

Hello, I have kind of the same Problem. The screen does not work. I tested what would happen if I plug the screen alone into my pc. It boots and then obviously says that the machine is not reacting. Though if I plug it into to the controller box it just boots shows the ‘s’ for a couple seconds an…

Hallo, könntest du mir sagen was du gemach hast?

Hi David, der Nullleiter in der Steckdose war schlecht montiert :woozy_face: Holen Sie sich Outlook für iOS

Replying to a closed thread isn’t a good way to get answers. Next time, start your own thread. Leave the screen on for a generous amount of time before you declare it “dead”—this isn’t a fast-booting system. If you really, honestly think you have a hardware issue, contact support@snapmaker.…

Danke, habe alles nochmal überprüft. Funktioniert leider immer noch nicht.

Here is my response to your own thread, please post only one time per topic. [image] Screen turns on show S and turns off Snapmaker 2.0 You have to email support if you need a replacement. It should be possible to connect the hmi touchscreen to another usb port with an a…

Nichts funktioniert

Snapmaker 2.0 (3-in-1)

xchrisd November 24, 2022, 6:56pm 9

Here is my response to your own thread, please post only one time per topic.

Topic		Replies	Views
Screen turns on show S and turns off Snapmaker 2.0 (3-in-1)	1	705	November 24, 2022
Help, Blackscreen at Startup Snapmaker 2.0 (3-in-1)	18	1042	September 22, 2023
Touch Screen not working after assembly Snapmaker 2.0 (3-in-1)	19	3886	May 28, 2023
Snapmaker 2.0 problem Original (3-in-1)	5	1989	January 17, 2020
Blank Touchscreen Original (3-in-1)	9	1516	April 12, 2023

Nichts funktioniert

Related topics