Hello all! First post, I bet this is answered somewhere here but I couldn’t find it. Looks like my nozzle is jammed with filament. I tried pushing it out like it says at https://manual.snapmaker.com/3d_printing/faq/what-should-i-do-when-the-nozzle-is-jammed.html I then tried to take the jammed noz…

Here is the product video about: [image] Great Hotend Mechanism Snapmaker 2.0 There already is an official Video: By the way: I just printed TPU (flexible) filament. No problems, works out of the box. The whole new print head design is really awesome!

well the thing is that the heat break and nozzle are going to be hard to turn while its cold, usually you plug it back in to the head and command it to heat up at which point the nozzle should spin right off of it the heatbreak is also threaded in to the block. i think thats a video relevent to t…

Thanks for the advice I’ll try.

Thanks! That video should be linked better :slight_smile:

Need help with jammed nozzle

Snapmaker 2.0 (3-in-1)

xchrisd January 1, 2021, 9:42pm 4

Here is the product video about:

Topic		Replies	Views
Can’t Remove Hot End Snapmaker 2.0 (3-in-1)	5	735	March 5, 2021
Replacing nozzle Snapmaker 2.0 (3-in-1)	35	9021	September 4, 2022
Cannot Get Broken Off Filament Out of Module Original (3-in-1)	4	1277	February 25, 2018
Printer Nozzle Jamming Snapmaker 2.0 (3-in-1)	18	1472	January 23, 2022
Unblocking Extruder Original (3-in-1)	3	3633	June 13, 2018

Need help with jammed nozzle

Related topics