Hello, sorry if I can´t explain ma problem in proper english :grin: I´m having troubles with the original PVA support material. Tried to print a little testobject and after the second layer everything is like a spaghetti incident and the material is everywhere but not where it is supposed to be. …

Just go for Prusaslicer. There are awesome profiles and settings here in the forum.

Maybe there is a better slicer avaiable. But, I bought a high priced product and expect it to work. That‘s all. Maybe too much expectation. Greetings

Your z offset is too high (too far away) for your right nozzle, decrease it an test again.

Already lowered both nozzles -0.3mm, because both are too high. Otherwise the print will be completly up in the air.

if you want to do it correctly print somithing big on 1 layer, go to the printer with USB stick and begin to lower the nozzles on the machine until you see a goof result, so flat structure, just feel it in the moment you Print. This setting will be saved also for other Prints from prusa or octiprin…

The first layer is good on both nozzles. If it comes to noozle change and wipe tower and all the stuff, it ends like shown. Doesn‘t matter which support material I use, PVA or Breakaway I always get spaghettis :face_with_symbols_over_mouth: I will try to print one of the provided examples in luba…

If you share more photos we could help you. I guess your xy calibration is not good, as i see or guess from your first picture. Additionally i see your right nozzle skirt is not proper extruded and it seems you are too far away. May share a first layer picture or something? I am a user like you a…

In my opinion it is a setting problem in luban with the support material in general. Because I changed the filaments with each other and the second nozzle, normaly used for support, prints perfect pla. But the first nozzle, normaly pla, prints crappy support🤷🏻♂️ I will look for some bigger one la…

Dual Extruder and Support Material Issue

Snapmaker 2.0 (3-in-1)

Mini4all July 30, 2023, 2:43pm 3

And this is also happening.
Will it be fixed?

Topic		Replies	Views
Snapmaker 2.0 dual extruder supports on 4.7.3 Snapmaker 2.0 (3-in-1)	3	510	April 28, 2023
Only support is printing in dual extruder Snapmaker Luban Dual-extruder	7	279	February 13, 2024
Tips/pointers for dual extruder PVA support Snapmaker 2.0 (3-in-1) Dual-extruder	1	587	March 18, 2024
Support structure trouble Artisan (3-in-1) Gcode	3	329	October 9, 2023
Dual extruder printing in air on second layer Snapmaker 2.0 (3-in-1)	9	921	February 6, 2024

Dual Extruder and Support Material Issue

Related topics