This thread is for dicussion of the Snapmaker 2.0 Firmware Updates.

Everybody, agree. But those of us who have been trying to get a working unit after a year, we await firmware and Luban updates like crack.

I got the Dual extruder yesterday and just installed it. Without 1.15 it doesn’t recognise the module and they have disabled the upgrade via WiFi. I’m assuming because of the issues reported above. I upgraded via USB (without reading the reported issues on the form) with the orginal module attached …

First part of the calribation processes is the Auto Bed Leveling, it heats the bed to 60C before doing a 5x5 calibration… or it should. It gets to temperture and just sits there after wiggling the hot ends and does nothing. As a former IT Test Manager this is ridiculously poor and would suggest that…

One of my biggest gripes is they manked with the homing procedure. It now simply slams into the endstops and backs off a little instead of tapping them, then backing off and resampling slower for accuracy. Now every time it homes, the origin shifts around, particularly on Y and possibly Z. So I’ve d…

Sounds a bit that the finished production of the dual printing head outpaced the software development, and they hastily shot out a poorly tested version to allow the early receivers of the print head to use it, avoiding frustration of them. But in the end it seems they caused more frustration that w…

[image] Issues with firmware V1.15.11 and temporary solutions Snapmaker 2.0 (3-in-1) We saw the issues that you reported about the latest firmware V1.15.11. We are sorry about this unhappy experience. Today, we stopped the update push for V1.15.11. The software…

Apparently the latest official V1.15.11 has the inline power modification merged. However, it still has missed the one merge that breaks turning the laser off during transient lines if power is S0. Can you confirm?

Hi @nivekmai The dual extrusion 3d printing module feature was merged in Snapmaker2-Controller.

@OldFart @HorstBaerbel Sorry for the reply late. We release a quick fix version for yesterday for resolving Touchscreen blank issue, and we are looking into the add-on issues now, I will update here when we confirm this. Sorry for the inconveniences.

I have installed the latest version of the firmware 1.15.13 and the dual extruder head in a SM2 350t with Luban 4.5.1. The calibration works. However, when I attempt to print using both extruders the layers are off-set and it looks like and partially upset deck of cards. The part generally moves t…

Discussion of Snapmaker 2.0 Firmware Updates

Snapmaker 2.0 (3-in-1)

Jade January 30, 2023, 8:13am 598

Topic		Replies	Views
Discussion of Snapmaker J1/J1s Firmware Updates J1/J1s IDEX Firmware	204	8750	April 27, 2026
A350 Issues and Suggestions Snapmaker 2.0 (3-in-1)	24	8513	August 30, 2022
Firmware request J1/J1s IDEX	28	2103	May 5, 2023
Random HELP - Ask here! Snapmaker2.0 Troubleshooting guides	165	9129	January 12, 2021
Snapmaker 2.0 improvements Snapmaker2.0 Troubleshooting guides Feature-Request , Bug-report	34	3543	June 16, 2024

Discussion of Snapmaker 2.0 Firmware Updates

Related topics