Can't connect to wifi unless I remove the password

[stewl]

It could be that your wifi is using one of the channels that Snapmaker does not recognise as it’s set to Auto. Try changing it to a fixed channel in the “China” range to see if this works. If it does it would be great if you could raise it with Snapmaker as this needs fixed.

WiFi Connection Issues Possible Solution

Just discovered this week, the wifi on SM2 will only connect on allowed wifi channels that are permitted in China. Whereas in the west etc much more channels are allowed. Your wifi router by default has a Auto function to change channels depending on interference, and if you have more than one wifi router in operation you will most likely manually select different channels to avoid conflict. So, if by Manual or Auto means your wifi router goes onto a channel that is not permitted in China, n…