Hi there! I’m getting good results overall with the laser engraver, but so far I’ve been unable to get this working properly… after following the steps (accurately as far as I can tell) Snapmakerjs v2.5.2 Beta Testing I generate the gcode and start engraving, but the result is pretty significantly…

We would like to further investigate your case. I will send you a PM.

Do you mean that the camera was not level “with respect to the buildplate” or “with respect to the laser module”?

With respect to the laser module, which made it unlevel with respect to the build plate. So, when I tried using the camera the images didn’t stitch together accurately.

I’m experiencing a similar issue, except I don’t get an image at all, just nine colored squares. The colors don’t even correlate to what I’m trying to cut (I just have wood on the platform, and the squares are green, blue, and black). Edit: didn’t realize there was yet another calibration that I n…

I tried starting this as a topic, but got no response so I’ll add it here since it appears that @JKC20 is following it. (Need to ask support but haven’t gotten around to it) It works fine for me when I run the camera calibration with a piece of paper directly on the bed. But when I try to use it on…

You’re doing better than I. Here’s how a 3in by 9in white tile horizontally oriented near the center of the bed looks on mine: [camera_capture]

[image] FEATURE REQUEST: Laser settings Snapmaker Luban Hi there, my first post on the Forum, I would like to request a few features for laser engraving/cutting. First of all, when engraving Greyscale, there are 2 modes : Dot mode and Line mode. When choosing Dot mode,…

I had a similar looking combination of pictures. I was able to fix a lot of it by clicking the calibration button in Luban (left bellow the images). It is a bit surprising that the auto calibration was so far off. Just move the four white dots to the four corners of the calibration square. The more …

@olaf i have the same issue, did Someone or SM Support give you a solution yet ?

Cannot get accurate camera aid background for laser

Snapmaker 2.0 (3-in-1) Snapmaker2.0 Troubleshooting guides

Galduron September 17, 2020, 6:28pm 18

Please support this request so we might see some changes.

Topic		Replies	Views
Laser camera capture?!?!?! SM2 A350 Snapmaker Luban	9	2892	October 29, 2022
Camera Capture - Software Capture Bug/Issue Snapmaker 2.0 (3-in-1)	9	1294	November 10, 2021
Camera won't calibrate correctly Snapmaker 2.0 (3-in-1)	12	3361	October 15, 2021
Camera aid background position and work origin Snapmaker Luban	21	3868	July 10, 2022
Snapmaker 2.0 Laser camera caputer issue Snapmaker 2.0 (3-in-1)	22	2855	August 1, 2022

Cannot get accurate camera aid background for laser

Related topics