Auto leveling not working

[lrbouchard]

Hi,

My autoleveling stopped working today. It just tap into the nozzle, almost breaking the bearings. Here is a video

20231017_172213.mp4

Anyone knows what’s going on? It works perfectly this morning.

Thanks,

LR

[lrbouchard]

Found an other topic about this sorry, and also found my problem :

"Calibration Failed" on J1

I detached the build plate and start the calibration. Heads heat up and then you go to the next menu and clean the head. At this point you press the next menu and the bed goes up almost all the way to the heads and the left head travels right above the datum point and immediately the screen shows a “Calibration Failed” notice. It states “Please check if the axes can move properly and if the nozzles are clean. The machine will go home first.” At this point you press ok and you stuck with having t…

[nweolu]

if there is a solution there, share the link here and mark it as solved to help future searchers.

[lrbouchard]

I don’t find where I can mark it as solved?

[nweolu]

[lrbouchard]

Don’t have this, maybe because I’m new on the forum?