Snapmaker 2.0 Firmware Updates and Downloads

Jul 21 2021: Snapmaker2_V1.13.1

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Controller

New Features

  • Add support for the Air Purifier.

Module

Bug Fixes

  • Fix a bug where 3D Printing Module heat up error with wrong PID.

Improvement

  • Improve Enclosure light output on power up.

Touchscreen

New Features

  • Add support for the Air Purifier.
    • Add Auto Turn On and Auto Turn Off options for Air Purifier.
  • Add German and French.
    • You can change the language settings through Settings > Language > language applicable > Save .

Bug Fixes

  • Fix a bug where Wi-Fi configuration won’t enabled on Touchscreen power up.

Improvement

  • Optimize UI/UX for Manual Focus using Laser Module.
  • Improve software crash report on Touchscreen.
    • You can check the anonymous data sharing option through Settings > User Preferences
  • Improve UI/UX for Print Settings Page
    • Optimize gesture actions for bottom tabs and swipe in/out logic.

Downloads

Snapmaker2_V1.13.1

MD5: f6a17d5ee9500c2d89dd803f24f716d2

Notes

This firmware update is only compatible with Snapmaker 2.0.

To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin .
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update .
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now .
1 Like

Sep 13 2021: Snapmaker2_V1.13.2

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Controller

New Features

  • Add “M425” G-code for saving backlash parameters. (#126)
  • Add remap 8-pin port feature for any axis. (#131)
  • Support G-code execution result triage. (#139)

Bug Fixes

  • Fix a bug where home_offset will set to 0 when using “M501” G-code.(#133)

  • Fix type of 3dp nozzle temperature. (#134)

  • Fixed a bug where power loss data could not be saved circulatively.(#138)

Touchscreen

New Features

  • Add Heated-Leveling feature for 3D Printing Module.
  • Return G-code responses in console when Wi-Fi remote connected via Snapmaker Luban.
    • Not all of the G-code responses were compatible for now. We will keep improving this feature in furture updates, please stay tune.
  • Add Enclosure light auto turn on upon startup options.
    • The option will be set as “Auto On” after upgrading from the previous version.

Bug Fixes

  • Fix a bug where showing wrong connected access point when back from password page in Wi-Fi settings.

Improvement

  • Optimize UI/UX for USB device detection.
  • Improve Wi-Fi connection experience.
    • Wi-Fi page will show up connection result while connecting.

Downloads

Snapmaker2_V1.13.2

MD5: 52ef37ce21f141077297ef0a48c4586f

Notes

This firmware update is only compatible with Snapmaker 2.0.

To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin .
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update .
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now .
5 Likes

Dec 13 2021: Snapmaker2_V1.14.1

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Module

New Features

  • Support 10W High Power Laser Module
  • Add minimum version requirements for each modules.

Controller

New Features

  • Refactor G-code transmission for Printing.
  • Support 10W High Power Laser Module.
  • Add “M76” G-code for triggering pause request in printing.
  • Add “M1012” G-code for Emergency Stop Button status output.
  • Prohibit machine moving while controller could not recognized machine model.

Bug Fixes

  • Fix a bug where home_offset could not overrode in some case.
  • Fix a bug where “M92” G-code could not saved parameters.

Improvement

  • Optimize printing time consuming in Laser Engraving.
  • Optimize “M92” G-code output in console.
  • Improve sstp protocol for Touchscreen.
  • Optimize config file read/write logic for safety recovery.

Touchscreen

New Features

  • Support 10W High Power Laser Module.
  • Refactor G-code transmission for Printing.

Bug Fixes

  • Fix a bug where Wi-Fi status won’t updated when enabled/disabled Wi-Fi in Settings > Wi-Fi.

Improvement

  • Optimize 3D Printing Calibration
    • Touchscreen will pop up confirm dialog while machine was not calibrated successfully.
  • Improve touchscreen recovery from application crash.
  • Improve UX for unplug USB drive.
  • Update German and French copywriting.
  • Update resources for Settings > About Machine.

Downloads

Snapmaker2_V1.14.1

MD5: 2511404378127c07f2138838fa70a9df

Notes

This firmware update is only compatible with Snapmaker 2.0.

To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin .
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update .
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now .
2 Likes

Jan 14 2022: Snapmaker2_V1.14.2

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Controller

New Features

  • Add “M25” G-code for Pause Print command.

Bug Fixes

  • Fix a bug where 10W High Power Laser Module will not activate laser in some cases.
  • Fix a bug where Linear Module initialized wrong lead value while recovering from factory reset.

Improvement

  • Optimized print G-code transmission in printing.

Touchscreen

Bug Fixes

  • Fix a bug where Laser would not turn off while exiting Set Origin screen with 10W High Power Laser Module.
  • Fix a bug where Camera Capture will failed while Snapmaker Luban start capturing photo from machine in some cases.

Improvement

  • Optimized UX for Thickness Measurement Calibration.

Downloads

Snapmaker2_V1.14.2

MD5: ffd8c58ff73241b03fd9d84d9a24bbdb

Notes

This firmware update is only compatible with Snapmaker 2.0.

To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin .
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update .
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now .

Jun 20 2022: Snapmaker2_V1.14.3

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Controller

Improvement

  • Optimize “M1005” G-code output in console .

Touchscreen

New Features

  • Add Polish and Spanish .
    • You can change the language settings through Settings > Language > language applicable > Save .

Improvement

  • Optimize copywriting for Add-ons .
  • Update Model description in Settings > About Machine .

Downloads

Snapmaker2_V1.14.3

MD5: 563bd5a63d9b85c1cd92f3b16d88e6f7

Notes

This firmware update is only compatible with Snapmaker 2.0.

To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin .
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update .
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now .

Jan 31 2023: Snapmaker2_V1.15.12

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Notice : Please update the latest version firmware before using Dual Extrusion 3D Printing Module.

Module

New Features

  • Support Dual Extrusion 3D Printing Module

Controller

New Features

  • Support Dual Extrusion 3D Printing Module

Bug Fixes

  • Fixed a bug that controller will not initializing unrecognized module to prevent firmware halted

Touchscreen

New Features

  • Support Dual Extrusion 3D Printing Module
    • added XY Offset Calibration, Sensor Calibration and Offset Calibration Check
    • added Flow Rate Control in printing

Bug Fixes

  • Fixed a bug that Touchscreen stuck in the blank screen after firmware downgraded

Improvement

  • 10W High Power Laser Module compatibility for Snapmaker 2.0 A150 model

Downloads

Snapmaker2_V1.15.12

MD5: d30c01ce86558ebcdd165316fdc8bdd3

Notes

This firmware update is only compatible with Snapmaker 2.0.

To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin .
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update .
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now .

Feb 3 2023: Snapmaker2_V1.15.13

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Controller

Improvement

  • Improved Linear Module exception interception

Touchscreen

Bug Fixes

  • Fixed a bug that pre-heated temperature not applied in Control
  • Fixed a bug that skip option will back to intro screen in Dual Extrusion Module Guide

Downloads

Snapmaker2_V1.15.13

MD5: 2beb0c78e93750a5ecfdfe7e6e38d495

Notes

This firmware update is only compatible with Snapmaker 2.0.

To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin .
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update .
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now .

Feb 11 2023: Snapmaker2_V1.15.15

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

This is a beta version for Snapmaker 2.0 Firmware

Known issues: In nozzle temperature adjustment in printing with Dual Extrusion 3D Printing Module, the widget will point at zero when entered

Controller

Bug Fixes

  • Fixed a bug that live Z offset calculated incorrectly when go printing immediately after leveling

Touchscreen

Bug Fixes

  • Fixed a bug that the heated inactive extruder did not cool down when exiting the control page

Downloads

Snapmaker2_V1.15.15

MD5: 4fb26c1fb29963d732f59c971750ea0e

Notes

This firmware update is only compatible with Snapmaker 2.0.

To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin .
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update .
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now .

Feb 17 2023: Snapmaker2_V1.15.17

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Controller

Bug Fixes

  • Fixed a bug that live Z offset calculated incorrectly when go printing immediately after leveling

Touchscreen

Bug Fixes

  • Fixed a bug that the nozzle temperature adjust widget will point at the first time when printing
  • Fixed a bug that Touchscreen showed wrong add-on status while Dual Extrusion 3D Printing Module plugged
  • Fixed a bug that pre-heated option didn’t show up when switching to nozzle page when using Dual Extrusion 3D Printing Module

Downloads

Snapmaker2_V1.15.17

MD5: f0879e2a10103cadc9c575b376ea7584

Notes

This firmware update is only compatible with Snapmaker 2.0.

To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin .
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update .
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now .

Feb 24 2023: Snapmaker2_V1.15.19

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Controller

Bug Fixes

  • Fixed firmware watchdog to prevent firmware unexpected halt on boot
  • Fixed a bug that Sensor Calibration could not start when firmware parameters are lost in some scenario

Improvement

  • Improved valid value check of nozzle temperature in 3D Printing
  • Improved exception error report in Dual Extrusion 3D Printing Module

Touchscreen

Bug Fixes

  • Fixed a bug that overrides the right nozzle temperature during printing causes unexpected target temperature

Improvement

  • Improved exception error report in Dual Extrusion 3D Printing Module

Downloads

Snapmaker2_V1.15.19

MD5: 8c0051f0340b7c42fd82ae0a24ba2302

Notes

This firmware update is only compatible with Snapmaker 2.0.

To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin .
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update .
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now .

Mar 6 2023: Snapmaker2_V1.15.20

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Controller

Bug Fixes

  • Fixed a bug that Laser Camera Capture result shifted when using Snapmaker 2.0 A350 model

Improvement

  • Improved Dual Extrusion 3D Printing module initialization information data received to prevent not getting the right extruder offset value

Downloads

Snapmaker2_V1.15.20

MD5: c419b736f2820c180bae9e771b256467

Notes

This firmware update is only compatible with Snapmaker 2.0.

To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin .
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update .
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now .

Mar 10 2023: Snapmaker2_V1.15.21

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Controller

Bug Fixes

  • Fixed a bug that hotend fan had stopped unexpectedly in some scenario

Touchscreen

Bug Fixes

  • Fixed minor wrong description in Dual Extrusion 3D Printing Module Feature.

Downloads

Snapmaker2_V1.15.21

MD5: 90a170500f4d8431c0607a00261fa492

Notes

This firmware update is only compatible with Snapmaker 2.0.

To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin .
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update .
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now .

Mar 29 2023: Snapmaker2_V1.15.22

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Touchscreen

New Features

  • Added display of Wi-Fi AP information
    • In Settings > Wi-Fi, connected AP networks will have an info icon, which when clicked, will display current network information

Bug Fixes

  • Fixed the issue where the screen disconnects immediately during remote connection in certain scenarios

Downloads

Snapmaker2_V1.15.22

MD5: c31a18d4bbaff6c6713c527edecbfde7

Notes

This firmware update is only compatible with Snapmaker 2.0.

To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin.
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update.
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now.

Apr 4 2023: Snapmaker2_V1.15.23

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Touchscreen

New Features

  • Added RSSI value display (signal sensitivity) in Wi-Fi network information

Downloads

Snapmaker2_V1.15.23

MD5: 0d4210f6071326260271f7d468fb2989

Notes

This firmware update is only compatible with Snapmaker 2.0.

To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin.
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update.
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now.
1 Like

May 19 2023: Snapmaker2_V1.15.26

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Touchscreen

New Features

  • Added retraction warning if G-code retraction distance was not recommended in Dual Extrusion 3D Printing Module

Bug Fixes

  • Fixed a bug that adjusting the Initial Layer nozzle temperature and heated bed temperature failed in 3D Printing

Controller

New Features

  • Added “C” and “W” custom parameter support with “M109” G-code

Improvement

  • Reduced retraction distance when pausing in 3D Printing job

Downloads

Snapmaker2_V1.15.26

MD5: 546a8100bd5b9a3cd1b7cef9734e0484

Notes

  • This firmware update is only compatible with Snapmaker 2.0.
  • To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin.
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update.
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now.
2 Likes

Jul 14 2023: Snapmaker2_V1.16.5

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Touchscreen

New Features

  • Added Quick Swap Kit support

Improvements

  • Improved remaining storage checks when choosing a file in Touchscreen
  • Improved initial temperature parsing and applying logic in Touchscreen

Controller

New Features

  • Added Quick Swap Kit support

Bug Fixes

  • Fixed a bug that the 3D Printing tool head cooling fan was unexpectedly off when recovering from power loss

Downloads

Snapmaker2_V1.16.5

MD5: 2d2086ecbcde46f8a633cc09c1b7f467

Notes

  • This firmware update is only compatible with Snapmaker 2.0.
  • To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin.
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update.
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now.
1 Like

Jul 27 2023: Snapmaker2_V1.16.7

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Touchscreen

Bug Fixes

  • Fixed a bug that Luban couldn’t switch extruder when was connected to Touchscreen
  • Fixed a bug that G-code paramenters were replaced when parsing G-code file.

Downloads

Snapmaker2_V1.16.7

MD5: 7ad04fba6a23e8f2a38c473f176b7a34

Notes

  • This firmware update is only compatible with Snapmaker 2.0.
  • To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin.
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update.
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now.
1 Like

Sept 5 2023: Snapmaker2_V1.17.17

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Touchscreen

New Features

  • Added 20W Laser Module and 40W Laser Module support

Mainboard

New Features

  • Added 20W Laser Module and 40W Laser Module support

Module

New Features

  • Added 20W Laser Module and 40W Laser Module support

Downloads

Snapmaker2_V1.17.17

MD5: 47e257adc44077807ca75009f0388645

Notes

  • This firmware update is only compatible with Snapmaker 2.0.
  • To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin.
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update.
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now.
2 Likes

Oct 25 2023: Snapmaker2_V1.18.0

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Touchscreen

New Features

  • Refactor Touchscreen Print Job Management
    • In the previous version, when disconnected from Snapmaker Luban during print job, Touchscreen will request stop print job, and could not control the print job until reconnected from Luban.
    • In this version, when disconnected from Snapmaker Luban, Touchscreen will return to print. Print job control, power loss recovery and filament detection will recover on Touchscreen.
  • Added new Run Boundary Mode for 20W/40W Laser Module
    • Crosshairs Mode and Working Laser Mode

Bug Fixes

  • Fixed a bug that Touchscreen could not adjusted temperature and load filament when filament ran out during print
  • Fixed a bug that guide procedure did not finished correctly when using 10W Laser Module and Rotary Module
  • Fixed a bug that Touchscreen could not adjusted B Axis origin when using 20W/40W Laser Module and Rotary Module
  • Fixed a bug that Touchscreen showed wrong elapsed time in some scenario

Improvements

  • Improved Touchscreen UI/UX with Dual Extrusion 3D Printing Module and Quick Swap Kit
  • Optimized Toucreen processing for file transfer and upgrade when local storage is low
    • Notice: When local storage is low or insufficient, Touchscreen will clean up local files for free up enough space (according to the file created time locally, from earliest to latest).

Mainboard

New Features

  • M3/M4 Gcode update
    • Support for M3/M4 to turn Trapizoid Power on or off (in Marlin definition). This differs from standard Marlin, which configures LASER_POWER_TRAP when compiling firmware. The M3/M4 definition will now favor grbl.
    • Marlin’s M3 I and M4 I switching between Continuous Inline Mode and Dynamic Inline Mode is currently not supported. It is important to note that Marlin’s definition of Dynamic Inline Mode is not the same as Grbl’s definition of Dynamic Laser Power Mode.
  • G0/G1 Gcode update
    • In both M3 and M4, the laser is turned off when using the G0 movement.
    • Both Marlin and GRBL types of Inline Mode.

Module

Bug Fixes

  • Fixed a bug that flame sensor triggered on boot up unexpectedly in 20W/40W Laser Module

Downloads

Snapmaker2_V1.18.0

MD5: d5993475a8b25d63eb356623b661cb50

Notes

  • This firmware update is only compatible with Snapmaker 2.0.
  • To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin.
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update.
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now.
2 Likes

Nov 13 2023: Snapmaker2_V1.18.1

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.

Changelog

Mainboard

Bug Fixes

  • Fixed a bug that Laser power was turned off in printing in some scenario.

Downloads

Snapmaker2_V1.18.1

MD5: 3e086462f3e389b82b37bd4d83a655a2

Notes

  • This firmware update is only compatible with Snapmaker 2.0.
  • To see your current firmware version, go to Settings > About Machine .

How to Update Firmware

  • Via a USB flash drive
    • Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
    • Plug the drive into the Controller.
    • On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin.
  • Via Wi-Fi
    • On the Touchscreen, tap Settings > Firmware Update.
    • Read the changelog and download the firmware.
    • After the firmware is downloaded, tap Update Now.
1 Like