So… After a lot of testing… It’s been awhile since I’ve done a guide, and this one was a long time coming. This guide will allow you to do your entire project in Lightburn, and (if connected via USB) run it directly from Lightburn. Letting you skip Luban or using the USB drive entirely. A quick n…

I’ve read about the horrors and have been testing what I can. So far none of the things have happened to me. The emergency stop crashed the touchscreen once, but still halted the machine, and subsequent tests it functioned properly. I don’t have the purifier, so I can’t test that. I might have a go …

Ich bin zu unerfahren, aber kann es sein, dass der Snapmaker mit dem GCode nichts anfangen kann. Der sucht eine .nc Welchen Denkfehler habe ich mir zu Eigen gemacht?

Es gibt leider keine “genormte” Dateiendung für GCode-Dateien. Für Laser-GCode hat sich .nc eingebürgert, für Fräsprogramme .gcode oder .cnc und für 3D-Druck auch .gcode. Alle drei sind aber lesbare Textdateien mit GCode.Mit anderen Worten: Einfach Dateiendung von .gcode auf .nc umändern und glückli…

Hallo und guten Tag. Ich würde auch gern wunderbare Dinge tun. Freue mich, dass ich den A350 mit Lightburn verbunden habe. (USB) Die Einstellungen habe ich von den ersten Seiten hier übernommen. Mir ist leider immer noch nicht klar, wo / wie ich die Laserhöhe einstellen kann/ muss. Für einen Hinw…

Make sure in your settings that Z is enabled, and relative is disabled. [Screenshot 2023-01-30 085812] Your material height will appear under the cuts/layers section. [Screenshot 2023-01-30 085909]

Unless they reverted the homing change, I won’t be using it. With how it slams into the limit switches, repeatable origins are impossible. Plus, since I don’t have a dual extruder, nothing else was changed that I need anyway. (until I get unlazy and make a new build reverting the homing change mysel…

They updated the github and I was correct about the pulloff being what broke the repeatable origin. So here’s an updated build. Snapmaker_V4.5.24-SKREE_20230202.bin_20230202.bin.zip (159.5 KB) Based on latest github controller version 4.5.24, dated 02/02/23, reverted the 1mm pull back to 3mm, and …

hello @Skreelink . I still have the previous version inline version from Brent. If I upgrade to yours, is there any specific to keep in mind or change in lighburn? I am a bit confused by the Y offset, home bump and other things on the chat. Basically , the settign I have if just to set up a Marlin…

[image] gpt1plon: If I upgrade to yours, is there any specific to keep in mind or change in lighburn? No, there’s nothing you have to change. Most of the instructions above are to automate most functions. If you don’t use that to plan your projects, then it’s all the same for you. …

Full Lightburn Control Guide

Snapmaker 2.0 (3-in-1)

VaporPhoxxe January 31, 2023, 7:32pm 132

A newer version v1.15.12 is now available for download → Snapmaker 2.0 Firmware Updates and Downloads - #21 by Alan

Topic		Replies	Views
1064nm IR+20/40W + Lightburn Guide Snapmaker 2.0 (3-in-1)	125	8132	April 29, 2026
Snapmaker 2.0 A350T and Lightburn Snapmaker Luban	112	3883	November 3, 2023
SM1 Laser (1600 mW) and working with Lightburn Snapmaker2.0 Troubleshooting guides	37	8574	October 2, 2020
Laser Pause While Changing Power Snapmaker 2.0 (3-in-1)	91	5519	May 26, 2021
Working camera capture with Lightburn Snapmaker 2.0 (3-in-1)	85	8511	June 14, 2026

Full Lightburn Control Guide

Related topics