Hi all, Attached are the Cura and Simplify3D profiles for the Snapmaker 2.0. Please refer to the following article on our website for specific settings. Thank you. [image] What is the recommended 3D printing settings in Cura or Simplify3D for... Recommended settings in Cura: 1. Model: …

[image] [image] Hopefully the pictures help everyone to get a better understanding of the cura settings.

Thank You! I have SM A350 as my first 3D printer. Digging around and did not understand Luban SW. In here I first time saw Cura and Simplify 3D . Tried with Cura, but was unable to enter required dimensions at setup. then tried Simplify 3D . Downloaded its setting at here and modified/edited l…

@staff Instead of trying to provide profile for all software that the community uses, better would be to provide all the technical requirements and measurements, so the community could build these profiles. People should be able to use the software that they already use in their workflow. And option…

@Edwin Someone from staff or no one @ staff cares about?

@JKC20 For Simplify3D, I imported the FFF files above - but for my A350 I changed these values, but I want to be sure this is correct. [Screen Shot 2020-10-14 at 10.54.36 PM] I notice the g-code start and end look way less than what is in the Cura section: see screenshot from the imported FFF fil…

@JKC20 Please update the support article to have correct Cura print head settings as discussed in this thread? I found the support page first, and this forum page (with better info) second, so changing the support page would make it easier for the next person. Thanks.

@JKC20 Quick Question. In the article, the image of the settings shows different Start G-Code than in the step 5. Namely the visible addition of the commands: M104 S205 M140 S70 Which appear to be related to the temp of the bed and the extruder. Do I need these additions?

Are you asking about Cura or Simplify3d The values on your pasted Gcode are specific temperatures (specifically saying 205 nozzle and 70 bed), while in the slicer pre-code you are going to want the variable definitions instead. otherwise any temp settings you have wont kick in at the start of the p…

I was trying to use Cura and the sample provided included the M104, M140 in the image, but not in the text version. I was asking if I needed the M104, M140 and it seems like I do. So if I am understanding you correctly, this is my new settings. [image]

Profiles for Snapmaker 2.0

Snapmaker 2.0 (3-in-1)

brent113 October 15, 2020, 4:30pm 29

@ConsummatePro If you’d like you can reference my S3D profile I posted here and compare what I changed as well: Snapmaker 2.0 Initial Calibration Settings / Experiences

Topic		Replies	Views
SM2 Simplfiy3D profile Snapmaker 2.0 (3-in-1)	53	8219	January 25, 2021
Cura settings for the A350 Snapmaker 2.0 (3-in-1)	59	16247	March 8, 2021
Snapmaker 2.0 settings are available in Cura 4.9 Official Articles	14	6966	November 4, 2021
Simplify3D Profile J1/J1s IDEX	12	2244	May 15, 2023
Setting up Simplify 3D for SM2 (including FFF-File for A350) Snapmaker 2.0 (3-in-1)	19	5294	October 22, 2023

Profiles for Snapmaker 2.0

Related topics