Hello, I have a problem with my Snapmaker 2.0 and Lightburn. I can connect and control everything via USB, but after the first contour has been cut, the laser switches off and moves to the next contour without a laser beam.

I was also experiencing the laser power dropping to 0 after the first path(s). In Lightburn, Device Settings, GCode panel, enable the option “Emit S value with every G1 command” and you’ll be operational again. [cap_3466]

This seems a lightburn problem. Is it turned on in the gcode on the second contour? Maybe this guide helps: [image] Full Lightburn Control Guide Snapmaker 2.0 So… After a lot of testing… It’s been awhile since I’ve done a guide, and this one was a long time coming. This…

When I updated lightburn to 1.5, I could control everything normally with the move controls and even the fire button, but when I hit start, it would just sit there and nothing would happen. I had an install file for 1.4.05 so I put that back on and everything worked with out issue. Something the…

Maybe this will help: [image] Full Lightburn Control Guide Snapmaker 2.0 Hi Everyone! LightBurn chiming in here. It appears that with a recent firmware update, all Snapmaker devices (not the Ray, which already was GRBL) now present as GRBL devices, rather than Marlin. Thi…

I will test it. Thank you so much. Snapmaker Support wasn’t helpful

Problem with Lightburn and 2.0 with 40W Module

Snapmaker 2.0 (3-in-1) Snapmaker2.0 Troubleshooting guides

Boxkite March 3, 2024, 8:57pm 5

Maybe this will help:

Topic		Replies	Views
Snapmaker 2.0 40W and lightburn does not work Snapmaker 2.0 (3-in-1) Troubleshooting , Lightburn	2	117	November 16, 2025
Appears Lightburn Does Work with snapmaker? Showcase & Prints	3	156	July 25, 2024
Snapmaker and Lightburn Snapmaker2.0 Troubleshooting guides	1	892	January 27, 2024
Help getting laser to fire in Lightburn Snapmaker 2.0 (3-in-1) Laser	1	359	August 15, 2023
Lightburn: Newbie question Showcase & Prints	26	1964	December 29, 2021

Problem with Lightburn and 2.0 with 40W Module

Related topics