Nozzle Temperature Not Loading

[takeota]

Please try previous version of the firmware (1.15.23).

Discussion of Snapmaker 2.0 Firmware Updates

I suspect that there is a critical bug in the latest firmware 1.15.26. When trying to print with dual extruders and using materials with different temperature settings, the start Gcode M104 is not recognized properly and the tool may not be able to heat up. (Printing starts without heating) By reverting the firmware to 1.15.23, the same Gcode could be used without problems. The code described is nothing special. Example: ;TYPE:Custom M82 ;absolute extrusion mode ;Start GCode begin G28 ;h…