Hello, I am mostly posting this video so that when support does respond and asks to see evidence, i will have it ready for them. The reason is I am going to try a workaround which doesn’t involve taking the rail apart (to protect the warranty). This video shows that the linear module for my print…

Thank you so much for posting this. I’m going to cite this post in my own support ticket because I’m having a similar issue all of a sudden. This is how I described it: [image] Currently I have a backlash compensation of around 0.1mm to correct it. Which is about 5x worse than it was a week ago. …

Use at your own risk of damage and warranty voiding: [image] Excessive play in x-axis linear module bracket Snapmaker 2.0 The mounting bracket on the linear module on the x-axis on my A350 is loose. The toolhead is tight to the bracket but the bracket itself now rocks up …

Yeah thanks for linking that I’ve seen that. But with Adam’s latest post I’m not doing anything without support’s blessing. They can’t have it both ways: Post self-help instructions for disassembling the linear module in their support website, and then denying warranty claims when you follow those.

That is precisely what is happening with me. I have made the swap out. If I wasn’t convinced before I am now, the thing is about 500% noisier than it was previously from the table going in and out. I am screwin’ around with some spool I am not used to right now so I don’t know if this is the best …

Here’s a picture from when I was trying to burn a hole through 6mm plywood. I had a bunch of tests set up with a circle around the first one. Here’s what the circles look like: [image] As a side note, I did finally get through the 6mm ply - 50 passes at 0.5mm/s. I’d describe it as “charred, but f…

All right so as i said I had some other videos during disassembly, plus I shot another one of how its going afterwards so far… First, mid disassembly - [disassembley review] Comparing the two modules - [module comparrason] Starting printing again - [printing now…

[image] MooseJuice: pre-made g-code for a temperature tower https://teachingtechyt.github.io/calibration.html#temp There. Also, wot in tarnation is that phone rocker doing in the background. Are you cheating your steps goal or something?! Is that the phone equivalent of a manual watch winde…

Haha, i shoulda removed that… I play Pokemon Go, and its getting steps to hatch eggs for me. 15 bucks! Thanks for the help

Calibration cube post module swap Top, Middle, Bottom X: 20.09, 20.11, 20.07 Y: 20.05, 20.06, 20.10 Z: 20.06, 20.02, 20.07 Prior to this change, I had these readings: X: 20.42, 20.35, 20.38 Y: 19.73,19.78, 19.88 Z: 20.42, 20.30, 20.32 Significant improvement. Nearly consistent, a slight de…

That’s great, nice job! Your variation is better than .06 total, that’s fantastic. So you just swapped X and a Y? And the Y carriage is rigid enough? That’s awesome.

Loose Linear Module w/ Workaround Attempt

Snapmaker 2.0 (3-in-1)

Snapmik November 17, 2020, 11:47am 21

@C.Harris, thanks for the answer. I have just contacted them with the issue.

A350 Noisy Printer

Horizontal Gaps & Vertical Lines (back of print)

Topic		Replies	Views
Linear module stopped working after third print Snapmaker 2.0 (3-in-1)	36	3120	January 22, 2021
Need support: linear module play Original (3-in-1)	16	1694	July 15, 2020
Y Linear module Fault Snapmaker 2.0 (3-in-1)	15	3457	February 18, 2022
Power Module / 3D Printer Module /Linear Module Snapmaker 2.0 (3-in-1)	35	3327	January 1, 2022
Excessive play in x-axis linear module bracket Snapmaker 2.0 (3-in-1)	51	9753	February 1, 2023

Loose Linear Module w/ Workaround Attempt

Related topics