Hi everyone! I hope someone can help me out, I keep getting these gaps between print layers around print’s I’ve been doing. Since I got the snapmaker I’m yet to get a print that doesn’t have this even occasionally. [Lines in Print] Multiple different filaments have been used. I’ve checked the ge…

Did you calibrate your extruder and linear advance? [image] Extruder Calibration a must Snapmaker 2.0 I thought a summary of everything you guys listed in the previous messages would be helpful for us newbies getting started. I struggled with some basic things, so I thou…

Hi, Thanks for the info. I’ve followed this information but I get an S-value of like 2200 (2143.55 to be exact)? This is because it only used like 8mm of filament. So I guess this means the gear is slipping. Now writing this I felt it was strange so I did the G1 E100 F300 step again and more filam…

I would suggest to contact snapmaker support. To me this looks like a production error. @Edwin

I hope not but possible, I did have issues with the CNC module and it needed to be replaced. The motor wouldn’t turn on at all after 30 minutes of use. Back to the 3D printer head when using the G1 E100 F300 code after cleaning the gear and extruder head once again. It is still doing different amou…

You have to enter relative mode before, I think it’s M83

I do enter relative mode each time. I follow the instructions you posted each time.

You have to enter relative mode once, then you could extrude more than once. I start my machine and will have a look, just a moment. EDIT: @MyrddynEmrys Maybe your filament is a bit slippy? Try it with less speed like G1 E100 F100 and see if this helps. I have no idea why your extruder extrudes…

From your images I would say that you have excessive retraction settings. If you are using the Snapmaker default setting in luban it is far too much. Try setting retraction distance to 1-2mm and retraction speed to 20-35mm/s. Your problems in getting consistent extrusion would suggest to me that ei…

Lines and gaps between print layers

Original (3-in-1)

xchrisd August 21, 2020, 4:05pm 2

Did you calibrate your extruder and linear advance?

Using Simplify3D instead of Luban

Topic		Replies	Views
Inconsistent Layerlines Snapmaker 2.0 (3-in-1)	49	553	May 5, 2025
Extrusion Problems Number 2 Snapmaker 2.0 (3-in-1)	40	1869	August 13, 2023
Gaps in certain spots Snapmaker 2.0 (3-in-1)	19	2207	March 30, 2021
SnapMaker extruder calibration Original (3-in-1)	27	7334	January 16, 2020
Horizontal Gaps & Vertical Lines (back of print) Snapmaker 2.0 (3-in-1)	26	2650	December 29, 2021

Lines and gaps between print layers

Related topics