Hello, I am trying to engrave some images on a piece of basswood but it comes up as if the machine is creating doubles of it next to each other. I have tried using png, jpeg, creating the file from scratch, changing laser power, speed, etc. Nothing seems to have worked. Let me know what else I can d…

If you have a Luban version below 4.9 you have to use firmware below 1.17.17. There where big changes in internal gcode transaction. Hope this helps: [image] Luban V4.9.0 Known Issues & Solutions Snapmaker Luban Hi Makers, We’re collecting the issues you’ve …

Hello! I am using Firmware Version 1.15.17 Do you think it might be a hardware issue and the laser is not working properly?

Only wanted to verify it’s no new luban/firmware bug. Did you look at your gcode, are there the doubled lines? Is your work piece protected against slipping?

The material is secure, I use 8 of the silicone plugs around the material. I will check the g-code and get back with you. Thanks for the help!

Laser Engraver Double Image

Snapmaker 2.0 (3-in-1)

xchrisd October 22, 2023, 5:42pm 2

If you have a Luban version below 4.9 you have to use firmware below 1.17.17.
There where big changes in internal gcode transaction.
Hope this helps:

Topic		Replies	Views
Luban 4.10.1 and Maschine Firmware 1.18.1 40W Laser and Luban problem !? Snapmaker 2.0 (3-in-1)	8	522	December 28, 2023
2.0 Laser 10W cutting lines mark Snapmaker 2.0 (3-in-1) Laser , Snapmaker_Luban	3	405	October 20, 2023
10w laser is engraving lines between shapes Snapmaker 2.0 (3-in-1) Laser	3	793	November 5, 2023
Laser engraving constant power mode issue? Showcases & Tips Gcode , Laser	23	1949	March 4, 2024
Snapmaker Luban v3.50 laser engraving on wood square Snapmaker Luban	13	1882	September 17, 2020

Laser Engraver Double Image

Related topics