Hey, I guess you want to print the sample vase?
Hey @demoniousrex , welcome!
For the vase, there is a quality profile for it, its called “caselibrary.vase.AXXX.quality”.
For future questions it would be nice to have a gcode+stl, maybe also a picture (the 3d object you want to print), so please upload it.
In this special case, you want to print a vase.- There is a preference under “Surface”, this is called “Spiralize Outer Contour” see the screenshot:
[Case-Vase_lib]
The print with this profile needs about 4hours.
Generally i would say, …
I guess you wanted to print the “Vase example” ?- Is a vase inside?- It looks full to me.
If you want to print this example, you have to take the example profile from Luban:
[image]
This takes about 4hours and the head is going spiral vise around the center after building the plate.
Check your first layer of your failed vase and have a look at the layer lines:
[A visual guide showing the different effects of z-axis calibration.]
A visual guide showing the different effects of z-axis calib…