I’ve had this issue with every 3D print using the snap maker. It looks like some weird hatch… This is after building a perfect raft so what’s going on?
You’re gonna have to give some information on your settings of you want some help troubleshooting. What software are you using for slicing, what settings, what’s the gcode, etc.
If you haven’t gone through and calibrated the machine you might also start with something like this: Snapmaker 2.0 Initial Calibration Settings / Experiences
1 Like
also pictures really help us figure out what the issue could be. so take a couple good pics and post them. then we will get you all straitened out 
1 Like