Update Jan 19, 2023 Hi Snapmaker 2.0 Dual Extruder Module owners, most units in the first batch have been sent out. However, the tracking number info has not yet been sent out. Our service team is preparing an email update on the delivery and tracking status, which will be sent to you soon. BTW, t…

Thanks. Those estep numbers are rather significant. the single extruder was around 212ish. Interesting.

honestly those numbers are right in the range. i suspect major gearing changes from the single nozzle to the dual extruder. My E steps are equal currently at E669.32 i may re test them after this conversation thread. but isnt on the top of my list currently

Yeah. The dual extruder either uses a higher gear ratio or more precise stepper motors or both so there are more steps per mm.

Thanks Hauke, I had the same feeling. Which leaves me with z offset as the postulated issue. Since my first lines are solid; I’m going to try mounting the supplied filament holder and see if using it as intended vice my filament boxes makes a difference. I can see how drag can lift the nozzle and t…

No reaction of snapmaker Support yet regarding the broken Pin in my Module…

[image] Dual Extruder design / Dry box setups Snapmaker 2.0 This is a description of the issues you may have if you have an elaborate dry box, Bowden tube setup that worked with your old single extruder head and your having issues with your new dual extruder. Problem: inc…

I’d send them an email a day replying to the initial email. Frustrating.

So I contacted support and they were very helpful. They have offered to replace my module because its got manufacturing issues. I was surprised and grateful!

[image] Anchoright: So I contacted support and they were very helpful. Btw. - my assumption: If you ask support friendly and polite, they answer quickly. If you whine, swear and threaten, they ignore you. If I read the tone that some users here in the forum use, I can very well imagine that t…

The old catch more flies with honey thing really works.

[First Batch Shipped Out] FAQs of Dual Extrusion 3D Printing Module for Snapmaker 2.0

Snapmaker 2.0 (3-in-1)

Spaced April 15, 2023, 1:46am 239

Yes its very possible that’s your issue.

Topic		Replies	Views
Dual Extruder Problems & Gripes Mega Thread Snapmaker 2.0 (3-in-1) Accessories	42	2629	April 28, 2023
Dual Extrusion Head: Heat creep discussion thread Snapmaker 2.0 (3-in-1)	169	9744	February 26, 2024
Dual Extruder simply does not work Snapmaker 2.0 (3-in-1)	40	2441	April 22, 2023
Cura & Dual Extrusion head first try Snapmaker 2.0 (3-in-1) Gcode , Slicer_Profile	39	5211	June 6, 2024
The Dual Extrusion 3D Printing Module for Snapmaker 2.0 is Available for Pre-order! Snapmaker 2.0 (3-in-1)	88	6583	March 27, 2023

[First Batch Shipped Out] FAQs of Dual Extrusion 3D Printing Module for Snapmaker 2.0

Related topics