Update Jan 19, 2023 Hi Snapmaker 2.0 Dual Extruder Module owners, most units in the first batch have been sent out. However, the tracking number info has not yet been sent out. Our service team is preparing an email update on the delivery and tracking status, which will be sent to you soon. BTW, t…

I’m actually not the owner of this mod. I found it via Youtube and bought the module. It is made with an SLA printer, the nozzles are brass, and a tube is attached with a zipper. You’ll need an air compressor with 3bar+. I’ll ask him whether I can share the STL file.

Dual extruder is constantly clogging. Plastic is getting stuck in the heat break area nearly every print. The only way I’ve found to remove this plastic is by taking a torch to the thing, heating it up enough to dislodge it. I haven’t been able to get a successful print out of this thing for around …

I had the issue with Pla. Switching to petg reduced it. But disassembled the unit until fixed. Maybe I give the new 15.17 a try

I also have real problems with the retraction and oozing. After updating my a250 to 15.17, I gave the dual extruder a new chance. I also added the stl blocks of snapmaker to lock the Filament gears. Calibration was directly okay, the only Thing was that the right hot ends oozed like hell. I start…

[image] Spark: Dual extruder is constantly clogging. It seems to be related to the profile/settings used: Dual extruder stops to extrude

I have had the dual extruder for about 3 weeks, using the Benchy for testing. I have installed addition fans and adjusted temperatures. However, I haven’t made good looking Benchys. Extruders plug, a lot of stringing, hitting of the part as the extruder moves from one color to the other.

[image] tms: Then came the information from support that there should be a “repair kit” for this problem. Did you ever hear back about this ominous repair kit?

@Hauke , Leider habe ich noch nichts bezüglich des Kits gehört. Ich soll nun aber einen neuen Dual-Extruder und eine neu PIE Platte bekommen. ————————————— @Hauke , Unfortunately I haven’t heard anything regarding the kit yet. But I should now get a new dual extruder and a new PIE plate.

They sent me “This is a temporary solution, a permanent solution is in the works and will be available as an aftermarket part at a later date.” on my compliant to print small parts to get a 500€ print head work properly. But I really lost my enthusiasm for this Module. Still working with the single…

[First Batch Shipped Out] FAQs of Dual Extrusion 3D Printing Module for Snapmaker 2.0

Snapmaker 2.0 (3-in-1)

Hauke February 19, 2023, 1:03pm 131

Not necessarily, but here’s a bit of my experience - I have hopes that with a bit more retraction tuning I’ll get there. Cura & Dual Extrusion head first try

Topic		Replies	Views
Dual Extruder Problems & Gripes Mega Thread Snapmaker 2.0 (3-in-1) Accessories	42	2592	April 28, 2023
Dual Extrusion Head: Heat creep discussion thread Snapmaker 2.0 (3-in-1)	169	9666	February 26, 2024
Dual Extruder simply does not work Snapmaker 2.0 (3-in-1)	40	2423	April 22, 2023
Cura & Dual Extrusion head first try Snapmaker 2.0 (3-in-1) Gcode , Slicer_Profile	39	5187	June 6, 2024
The Dual Extrusion 3D Printing Module for Snapmaker 2.0 is Available for Pre-order! Snapmaker 2.0 (3-in-1)	88	6552	March 27, 2023

[First Batch Shipped Out] FAQs of Dual Extrusion 3D Printing Module for Snapmaker 2.0

Related topics