Tomi
February 9, 2023, 3:59pm
101
This resistor (not a chip!) is used to automatically recognize the size of the nozzle. It’s just a helpful option! However, you can always change the nozzle size manually in the Luban settings.
Here is Melitta’s explanation:
hey, the Dual Extrusion Module still use the standard nozzle. If your nozzle is 0.4mm, it’s possible that you replace it to the new module. If you change the nozzle to a different diameter, the machine can’t recognize the new diameter, you need to change the settings in Luban manually. So, if it’s of a different diameter, I recommend you buy spare hotends with the diameters you need.
and
Hi, it’s still possible to replace the nozzle only for the Dual Extrusion Module, but we actually don’t recommend you replace it yourself if you are not an experienced guy in the 3DP world. Please notice that the user errors of nozzle replacement is not under our warranty. If you still greatly want to replace the nozzle yourself, please read on carefully to learn about what should you take care of when you replace the nozzle yourself.
To show you the whole process more clearly, I have asked my …