I am looking to print 32mm scale miniatures and I am finding I need tree supports which are only offered in Cura. I would also like to put a 0.2mm nozzle on the hot end so I can get the best quality possible. I tried following all the info I could find online and when I exported the gcode the bed d…

using the settings mentioned here, but unfortunately getting an error when sending the files from Cura to SN #2 350. Sending though wifi from Cura I get this error: [image] these are the settings I use or the machine in Cura [image] Saving the g-code and then importing to SN and then sending t…

File types are generally implemented using the file extension. I don’t know what cura sends as the file name, but that’s a great place to start.

Snapmaker have created a print profiles repository and the first configuration added is for Cura. [image] Snapmaker/Snapmaker-3D-Printing-Profiles Contribute to Snapmaker/Snapmaker-3D-Printing-Profiles development by creating an account on GitHub. I’ve not tri…

Check your gantry hight (should be 330, it is 30 on your screenshot)

indeed. thanks. will change that. though I have seen many different Gantry hights here on the forum. Not some much how high the gantry goes, but the size of the gantry itself. any idea what this metric refers to?

Have a look at this and or search the forum about gantry height :wink: [image] Profiles for Snapmaker 2.0 Snapmaker 2.0 [image] [image] Hopefully the pictures help everyone to get a better understanding of the cura settings.

so had a look online, and indeed the Gantry height is 26, not 330 as you mention. The Gantry height is the clearance between the bottom of the nozzle and the bottom of the horizontal extruder rail. See point of xchrisd here above

I’m glad my pictures are getting used as reference. I had to dig through curas pages to find out what everything was and then I added the pictures for visual learners likeyself.

I used the setting in this picture for my offsets with gantry height 26 as well as the Start Gcode that @mikkyo posted also copied here. Not having any problems. M140 S{material_bed_temperature} ;Start heating bed M190 S{material_bed_temperature} ;Wait for bed to reach temp before proceeding M10…

[image] pwvandeursen: Sending though wifi from Cura I get this error: Did you mean you’re sending from Luban? One can slice in Cura, save the g-code file, open the g-code file in Luban, and send via wifi to printer from Luban. If that’s not what you meant, then I’m curious what you are doing …

Cura settings for the A350

Snapmaker 2.0 (3-in-1)

xchrisd January 29, 2021, 6:46am 30

Have a look at this and or search the forum about gantry height

Topic		Replies	Views
Suggestions for removing supports without destroying the model Snapmaker2.0 Troubleshooting guides	41	5267	October 19, 2020
SM2 Simplfiy3D profile Snapmaker 2.0 (3-in-1)	53	8321	January 25, 2021
Profiles for Snapmaker 2.0 Snapmaker 2.0 (3-in-1)	41	18086	November 19, 2023
Advice for the New Guy? Snapmaker 2.0 (3-in-1)	30	4287	September 30, 2020
Cura Snapmaker Plugin released Snapmaker 2.0 (3-in-1)	70	9993	February 6, 2024

Cura settings for the A350

Related topics