Anyone created a filament holder for enclosure?

[rtrski]

Mine is posted here, but I have the A250. You might want it to have a longer loop in the Y direction for the A350.

Question regarding the filament holder

I’m with you on this one - I didn’t like the friction. My older machine was the more traditional style (the print heat moved in both X and Y, and the bed lowered for Z) and too much filament tug would not only result in the filament slipping, I’d even lose Y axis steps and my prints would ‘lean’. With the enclosure (you didn’t mention if you have one) it’s even more friction since the filament also routes thru the enclosure side hole / grommet. As someone else mentioned, bearings (I used ones…