Every time I go to print something the y axis will randomly make a grinding noise and lose alignment. Any idea what this could be?
Some Photos of the Y-Axis:
Print Settings:
{
“version”: 1,
“name”: “Original-Fast Print”,
“inherits”: “snapmaker”,
“metadata”: {
“visible”: true,
“readonly”: false,
“author”: “walker”,
“manufacturer”: “Snapmaker”,
“file_formats”: “text/x-gcode”,
“machine_extruder_trains”: { “0”: “snapmaker_extruder_0” }
},
“overrides”: {
“layer_height”: { “default_value”: 0.3 },
“layer_height_0”: { “default_value”: 0.4 },
“initial_layer_line_width_factor”: { “default_value”: 100 },
“wall_thickness”: { “default_value”: 0.8 },
“wall_line_count”: { “default_value”: 2 },
“top_thickness”: { “default_value”: 0.8 },
“top_layers”: { “default_value”: 3 },
“bottom_thickness”: { “default_value”: 0.6 },
“bottom_layers”: { “default_value”: 2 },
“infill_line_distance”: { “default_value”: 5.333333333333333 },
“infill_sparse_density”: { “default_value”: 15 },
“retraction_enable”: { “default_value”: true },
“retraction_speed”: { “default_value”: 40 },
“retraction_amount”: { “default_value”: 1 },
“retract_at_layer_change”: { “default_value”: false },
“speed_travel”: { “default_value”: 70 },
“speed_topbottom”: { “default_value”: 40 },
“speed_wall_x”: { “default_value”: 50 },
“speed_wall_0”: { “default_value”: 50 },
“speed_wall”: { “default_value”: 40 },
“speed_infill”: { “default_value”: 50 },
“speed_print”: { “default_value”: 60 },
“speed_print_layer_0”: { “default_value”: 18 },
“speed_travel_layer_0”: { “default_value”: 30 },
“skirt_brim_speed”: { “default_value”: 18 },
“retraction_hop”: { “default_value”: 1 },
“retraction_hop_enabled”: { “default_value”: false },
“magic_spiralize”: { “default_value”: false },
“magic_mesh_surface_mode”: { “default_value”: “both” },
“adhesion_type”: { “default_value”: “none” },
“skirt_line_count”: { “default_value”: 1 },
“brim_width”: { “default_value”: 8 },
“brim_line_count”: { “default_value”: 15 },
“raft_margin”: { “default_value”: 15 },
“support_enable”: { “default_value”: false },
“support_type”: { “default_value”: “buildplate” },
“support_pattern”: { “default_value”: “lines” },
“support_angle”: { “default_value”: 50 },
“support_infill_rate”: { “default_value”: 7 },
“support_line_distance”: { “default_value”: 2.66 },
“support_initial_layer_line_distance”: { “default_value”: 2.66 },
“support_wall_count”: { “default_value”: 0 }
}
}