Is the Matte heated a little more to separate it?
mixing ACE and BMCu, for example, or different encoding logic could be better thought out ^^
Top, this happens to me sometimes 
I’m always struggling with swap, even with 7 swaps I got 2 errors 
Not during load and unload..
I don’t have BMCus here, and don’t plan to buy some… And i don’t think this one can handle same color in more slots.. It does not have a preflight, so you have to adjust your loadout to the model.
Here is the pinout for the 6 pin connector
Rouge D+ Jaune D- blanc Gnd
Note that this refers to the pins when you look at the ACE, not your cable. I have doubts about your schematic.
Indeed, the colors I indicated are those seen when looking at the Molex cable specification sheet from the front, not the Ace Pro… I’ll redo everything based on the diagram with the link provided above… Thanks a lot.
Think about going to vote, people, we need to support this initiative,
I saw that you added the same color function ^^
Yes, good idea! Oh, forgot to mention your idea, will edit that tomorrow!
No worries, don’t worry ^^ I can’t wait to test your new features.
Hi, thanks for the report. That is a regression on my side: on firmware newer than 1.5.2 the vendor list only shows Generic, because our reader of the new filament database skips the Snapmaker and Polymaker rows. Fixed in the next hotfix.
what firmware are you on?
Thats it, regression starts with fw > 1.5.2
1.11b hotfix is out, fixes that.
My machine is still running the print job, which will take 16 hours to complete. I’ll update you then.
Nothing quite like a firmware regression showing up right before a 16-hour print. Fingers crossed the hotfix behaves.