Hi there I’m wondering if anyone might know a workaround to let me level the bed of my printer without the touchscreen module as mine is missing and I don’t really have the funds to replace it right now. I’ve tried tapping gcode into the console but g1029 just returns an OK and nothing happens. [C…

echo: M421 X5.00 Y5.00 Z0.00 echo: M421 X120.00 Y5.00 Z0.00 echo: M421 X5.00 Y120.00 Z0.00 echo: M421 X120.00 Y120.00 Z0.00 This means you didnt edit (and save?) your grid correctly. Have to look at my old M503 records about the offset but it seems ok for me. Offset on my old machine: : echo:…

You could try the solution in these threads and see if they works for you: [image] Touchscreen failure, need to level bed to use luban Snapmaker 2.0 You can use the Console and Control panel on Luban to level your heated bed (5×5 Auto Mode) by the following steps: Connec…

You have a snapmaker original, right? Because the instructions were for 2.0 and might not work. Original calibration is only 3x3 because of bed size.

Thank you very much for the quick reply mate, unfortunately as stated the machine just responds with OK and does nothing if you send command G1029 I did find in the Marlin documentation however (on which snapmaker is based) the gcode command G29, which seems to work much the same as autocalibration…

Send it a M502 to reset the settings to original and save it with M500. Have a look at this, point 7, virtual bed level: [image] 3d Print Guide_Walk Through Getting Started First of all, congratulations to a great machine! If you have any suggestions to this topic, feel…

Thanks I tried that method you link to there,it might have worked, it might not, honestly I can’t tell because no matter what I try, the Z Axis is just not playing nice for me. Home is still set below the build plate but trying to print something results in it starting in mid air. This has only be…

Did you reset to factory settings and the level your bed like described in the linked thread? Share your M503 here before reseting with M502 and saving with M500. Did you ever print something on your machine?

Here’s my current M503 echo:Steps per unit: echo: M92 X400.00 Y400.00 Z400.00 E92.60 echo:Maximum feedrates (mm/s): echo: M203 X300.00 Y300.00 Z5.00 E25.00 echo:Maximum Acceleration (mm/s2): echo: M201 X1000 Y1000 Z100 E10000 X_CNC100 Y_CNC100 Z_CNC100 E_CNC100 X_LASER3600 Y_LASER3600 Z_LAS…

And here it is after M502 and M500 M503 M503 echo:Steps per unit: echo: M92 X400.00 Y400.00 Z400.00 E92.60 echo:Maximum feedrates (mm/s): echo: M203 X300.00 Y300.00 Z5.00 E25.00 echo:Maximum Acceleration (mm/s2): echo: M201 X1000 Y1000 Z100 E10000 X_CNC100 Y_CNC100 Z_CNC100 E_CNC100 X_LAS…

Okay so I’ve had a fiddle around again, adjusted my offset so that 0,0,0 was sitting appropriately on the bed and then set my grid again, here’s my M503 now M503 echo:Steps per unit: echo: M92 X400.00 Y400.00 Z400.00 E92.60 echo:Maximum feedrates (mm/s): echo: M203 X300.00 Y300.00 Z5.00 E25.0…

It’s working! I jogged my Z axis down to meet the bed saw how off it was and adjusted my offest again by the same amount and it works! Its doing my first proper test now and so far so good [IMG-20230114-WA0002] Thanks so much for all the help!

Trying to level my bed without the touchscreen and more issues

Original (3-in-1)

Riskey January 13, 2023, 2:56am 2

You could try the solution in these threads and see if they works for you:

Topic		Replies	Views
Bed level from a PC Original (3-in-1)	10	683	September 18, 2026
Touchscreen failure, need to level bed to use luban Snapmaker 2.0 (3-in-1)	2	562	December 20, 2022
On achieving a better leveling (With help from Snapmaker Devs) Snapmaker 2.0 (3-in-1)	41	5095	September 3, 2024
SM2 Bed Leveling 101 Snapmaker 2.0 (3-in-1)	142	20501	January 25, 2023
Leveling / First layer Problems Snapmaker2.0 Troubleshooting guides	39	3638	July 19, 2021

Trying to level my bed without the touchscreen and more issues

Related topics