Update on Sep. 27 Hi Makers, You can now pre-order the Dual Extrusion 3D Printing Module for Snapmaker 2.0 in our online store. Don’t Miss the Limited Offer! You can get it for 369 USD from Sep 27 to Sep 30. After Sep 30, the pre-order price will be 399 USD. Where to Buy US Store: 3d printin…

You will be fine. The new 3D Printer Module has both sensors, each being used for different purposes. The fact that you are using an unmodified bed means that it was designed specifically for you machine. The “inductive” sensor is perfectly fine for anyone using a metal bed, and the flex plate co…

That sounds promising i just hope we really get that feature would hate if we would be left out of such a quality of life change.

The nozzle is a 0.4mm, as is standard. However, the exterior geometry matches standard V6 nozzles which when installed on the snapmaker2 hot end extend farther than the stock snapmaker nozzle by a MM or two. This is the nozzle I’m running: https://www.championx.com/products-and-solutions/drilling-t…

The spring in the feeder is to hard/tensioned for TPU. You have to change it for TPU to a softer one (from a ballpoint pen- there is a YouTube video about it). Afterwards it worked fine.

Hmm interesting, I will try to look it up but I dont feel to comfortable to change springs every time I want to print depending if its TPU or not … I would appretiate some solution from Snapmaker but I understand its probably not simple thing to do. Either way thanks.

Here is a post on how to print with TPU w/o making any modifications to your 3D Printer Module, and a picture of what it looks like: [image] Printing TPU with A250 (or any SM 2.0) Snapmaker 2.0 @highpower this is a known issue, and there is a rather simple workaround: M…

I’ll wait 6/12 months till they realise that they overpriced themselves. By then I’ll probably be on the AnkerMake M5 (ankermake-m5-3d-printer-5x-faster-printing-and-ai-camera) most of the time in any case.

I’m interested in getting this, but I’m not sure how it’ll work with an A350 and the enclosure. Will you just be able to mount both filaments on a larger holder and run through the same hole, or is there another intended setup? Also, assuming the new head isn’t compatible with the other spare hot …

This is not meant to be trolling. Now, that I see the EU shop prices (700 EUR vs. 430 pre-order) I have to say those prices are completely bonkers. I can get an entire FlashForge dual-extruder printer with build volume of 200 x 148 x 150 mm for 700 EUR. A complete printer, not an extruder head. Now…

I’m more concerned about getting a functioning Luban. The new dual print module obviously requires new Luban, but by all reports that seems to be a train wreck. I hate to order the print head only to be waiting months for working software.

The Dual Extrusion 3D Printing Module for Snapmaker 2.0 is Available for Pre-order!

Snapmaker 2.0 (3-in-1)

CNC-Maker September 24, 2022, 6:31am 39

Here is a post on how to print with TPU w/o making any modifications to your 3D Printer Module, and a picture of what it looks like:

Topic		Replies	Views
[First Batch Shipped Out] FAQs of Dual Extrusion 3D Printing Module for Snapmaker 2.0 Snapmaker 2.0 (3-in-1)	280	14023	July 19, 2023
Found image of dual extruder module on imakr Snapmaker 2.0 (3-in-1)	51	7053	March 15, 2022
Dual extruder For Snapmaker 2.0 Snapmaker 2.0 (3-in-1)	22	2211	March 24, 2023
Front Cover STL File & Replacement Kit Update (Dual Extrusion Module) Snapmaker 2.0 (3-in-1) Dual-extruder	70	6752	October 17, 2023
Dual extruder (not quick change) Snapmaker 2.0 (3-in-1)	2	796	September 27, 2022

The Dual Extrusion 3D Printing Module for Snapmaker 2.0 is Available for Pre-order!

Related topics