Technical Support Document

[scyto]

Some one posted this to the Facebook group. Thought it might be useful to repost here.

https://cdn-3d.niceshops.com/upload/file/Distributor_Tech_Support_v1.0_-Snapmaker_2.0_Troubleshooting_Guide_1.pdf

[scyto]

Page 58 is interesting…. Developer mode!?

[sdj544]

Old news:

Distributor Technical Support V 1.0

I found this while searching on Google. I am not sure if this was made public available on purpose but given the fact that I found it I will assume this. The Snapmaker staff is of course welcome to delete this topic if this was inappropriate. For everyone: Please keep in mind that everything that goes beyond the quick starter guide or for what you did not receive an official instruction from your distributor may damage your device and void your warranty. So please treat the provided information…

Android Developer mode on snapmaker screen

Android (Snapmaker too) has a developer mode. On Snapmaker A350 screen this can be accessed by going into settings and then selecting the About machine. Tap this 5 times on the machine picture and you can then enter Developer mode. [20210124_151207] When this has been activated you get 2 extra buttons Factory and Experiment. [20210124_151219]

-S

[scyto]

i asked them to delete the thread, thanks @sdj544