3D Printing - Temperature at 0

[xchrisd]

@carla

Target Temp 200°C and Current Temp rises up to the same temperatur

In this case, I think your gcode or usb stick is corrupt.
Let’s try this gcode:
https://forum.snapmaker.com/uploads/short-url/jsByiW8sNAd6wIrjQMSsoKjxVT0.gcode

It’s from this thread in the test section:

3d Print Guide_Walk Through

First of all, congratulations to a great machine! If you have any suggestions to this topic, feel free to send me a PM! You are new to 3d printing?- Be patient. The whole thing is very complex and just little adjustments will make the difference from failed to pretty prints. Start with easy, little things to create (1-3hours i would suggest) . Going to print the first time and then getting a 24h print on, maybe failes. There is a lot to learn, if it didn´t work for a long time, cool off a bi…