For the A350 and enclosure, I’m thinking of mounting the filament holder inside the enclosure instead of outside. The basic plan is to mount it on the A350 where it was before, but upside down. Basically I just don’t like where the holder is placed on the enclosure and the filament gets pulled a lot of different ways before making it to the printhead. My question is if anyone else has tried this and what the results were.

Someone tried it with the A250 enclosure? My first impression is that it cannot be done. But maybe someone more skillful than me succeeded…

I just got a food dehydrator and popped it in my enclosure (I also have an outlet inside my enclosure), works great for keeping the enclosure nice and hot to also avoid warping.

So I moved the filament holder back into the enclosure and it works great for the A350. Not sure if the other sizes would have enough space or not. Don’t really need the dryer I don’t think as it’s so arid in Colorado, but I’m still playing with it.

[image] harkijas: it’s so arid in Colorado My friend’s dinner table split from such low humidity in Denver in the winter - I’d say if anything you would need a humidifier to keep static discharge manageable.

on an A250? (these are characters just to fill)

I have a custom enclosure (for A350), but the dehydrator should fit in the 250 enclosure, you could mount it on the ceiling of the enclosure, above the bed in the front and it shouldn’t interfere with any prints. I can get you exact dimensions later, but I think it’s only ~250mm wide/long and maybe 100mm tall.

Esta es mi ubicacion para el filamenyo desde que adquiri el a350 y sin problema… [IMAG2831] [IMAG2832]

Pictures? would love to see approach.

I can’t find better photos of his custom enclosure at the moment but he did post this a while ago [image] A350 enclosure, alternate filament position Snapmaker 2.0 You can basically do the same thing as the 2nd one with the stock SM bracket just by lowering it a few holes. Still has plenty of clearance from the x-axis. [IMG_6001] -S

A350 enclosure, alternate filament position You can basically do the same thing as the 2nd one with the stock SM bracket just by lowering it a few holes. neat, any downsides i should consider?

Spool Holder inside enclosure?

Snapmaker 2.0 (3-in-1)

scyto October 10, 2021, 3:17am 15

neat, any downsides i should consider?

Topic		Replies	Views
A350 enclosure, alternate filament position Snapmaker 2.0 (3-in-1)	26	4817	January 23, 2022
Filament hold location? Snapmaker2.0 Troubleshooting guides	5	1051	January 21, 2022
Enclosure - Filament Spool Holder 'Modification' Original (3-in-1)	9	3437	July 15, 2018
Filament holder with enclosure Snapmaker 2.0 (3-in-1)	15	3954	March 31, 2021
How Much Headroom is in the Enclosure? Snapmaker 2.0 (3-in-1)	13	735	December 11, 2020

Spool Holder inside enclosure?

Related topics