@all
Thank you for your suggestions to make Snapmakerjs better. Here comes the latest version. Your feedback is always appreciated. Please post bug reports and feedback to this topic: Bug Reports and Feedback for Snapmakerjs V2.5.X =)
Release Note
Change Log:
Added G-code estimated execution time for laser and CNC
Optimized G-code generating time
Fixed the bug that extrusion is too little when using v2.5.3 to generate G-code
@all
Thank you for your suggestions to make Snapmakerjs better. Here comes the latest version. Your feedback is always appreciated. Please post bug reports and feedback to this topic: Bug Reports and Feedback for Snapmakerjs V2.5.X =)
Release Note
Change Log:
Massively improved software performance when loading and slicing 3D printing models.
Added custom installation on Windows. You can specify install location of Snapmakerjs; Future upgrades on Snapmakerjs will not erase your custom 3DP settings and uploaded fonts.
Added text mode for CNC G-code generator.
Added pocket as a carve path option for CNC G-code generator.
Added options for flipping models in Laser and CNC G-code generator.
Added nozzle and bed temperature control on status widget (Donāt forget to pause your work before setting a new target temperature).
Improved greyscale effects to produce more uniform speckling.
Before:
After:
Bugfixes
CNC G-code generation errors when using 180Ā° bits
@all
Thank you for your suggestions to make Snapmakerjs better. Here comes the latest version. Your feedback is always appreciated. Please post bug reports and feedback to this topic: Bug Reports and Feedback for Snapmakerjs v2.6.X =)
Release Note
Changelog:
Added Undo/Redo functions to laser G-code generator.
Added machine modal state in machine status widget.
In 3D printing G-code generator, we moved down adhesion and support sections to printing configurations; Added configurable line count for skirt, brim, raft adhesions; Added 3 selectable support patterns: Line, Grid, Zigzag.
Reworked material configurations, now you can duplicate existing material configurations and make changes on them.
Bugfix: fixed the bug that laser is not turning on when resuming from a pause on software.
Bugfix: fixed laser Multi-Pass wrong movements after engraving finished.
Other minor changes:
Added keyboard shortcut (Command+D / Ctrl+D) to duplicate selected 3D model.
Added jog speed input in Axes widget.
Reduced initial layer printing speed to 18mm/s for out-of-box better results
@all
Thank you for your suggestions to make Snapmakerjs better. Here comes the latest version.
Your feedback is always appreciated. Please post bug reports and feedback to this topic: Bug Reports and Feedback for Snapmakerjs v2.6.X =)
Release Note
Changelog:
Refactored models and G-code parser.
Reworked on outline calculation algorithm and even-old rule calculation on CNC G-code generator.
Fixed a bug that unable to preview G-code after any failed preview.
Fixed wall line count calculation errors for 3D printing.
@all
Thank you for your suggestions to make Snapmakerjs better. Here comes the latest version.
Your feedback is always appreciated. Please post bug reports and feedback to this topic: Bug Reports and Feedback for Snapmakerjs v2.6.X =)
Release Note
This release mainly solves the notarization problem of macOS Catalina.
Changelog:
Notarized application in order to work on macOS Catalina.
3DP: Added 2 support configurations, as follows:
āSupport Overhang Angleā to specify minimum angle of which support is added.
āSupport Densityā to adjust the density of support.
Fixed a bug that tool head model is not moving along with G-code sent progress.
@all
Thank you for your suggestions to make Snapmakerjs better. Here comes the latest version.
Your feedback is always appreciated. Please post bug reports and feedback to this topic: Bug Reports and Feedback for Snapmakerjs v2.6.X =)
This thread is closed because the Snapmakerjs is now rebranded as the Snapmaker Luban. Please check out the Snapmaker Luban with the latest features and updates here.