万众期待的快拆配件终于到货了！！！为了让大家用起来更方便更高级，第一时间和群里【孤狼】一起设计了免插线结构。
因为个人时间原因，目前仅做出了各配件三维建模，暂时还没有实物及测试，待我新疆行归来之后就会完成全部设计、测试及共享；先放出图来让有兴趣的朋友一起动手开造。
****【1】FDM
因为我没有单喷，所以单喷方案需要等【孤狼】完成后分享
整体思路为使用8P电池连接器作为免插拔连接，顶部去掉原厂插座，使用PCB及插针通过裸线连接快插公头。
【2】激光
激光同FDM一样，仅顶部盖板有区别
【3】CNC
CNC涉及到我另一个改装项目，所以暂时不公开。
太棒了
感谢分享
期待更新
This is amazing!
Looking forward to release, I would purchase this if it was a kit (including single extruder tho) hopefully lone wolf will finish his design 
这真太了不起了！
期待发布，如果它是一个套件（包括单个挤出机）我会购买它，希望孤独的狼能完成他的设计
Thank you for your recognition, we will complete this project as soon as possible
This is designed with a quick exchange accessory, which only acts as an intermediate no-plug connector and does not change any signal
先放一个热床快插模块的视频。
First, let’s play a video of the Heated bed Quick-swap insertion module.
This part has been completed
You can upload videos into the post, so you don’t have to host them.
If I understand it correctly, the bed in this video is equipped with quick swap power supply?
My user level is too low to upload at the moment.
Like the executive head, the cable is divided into two parts and connected to the quick swap male and female sockets.
This way, there is no need to plug or unplug the cable during replacement.
This project was initiated by me at the beginning, and I am the lone wolf you mentioned。
This is impressive, thank you for sharing pictures. This looks like complete. Is there anything are still improving?
How do you route the cable to the quick swap connector on y axis?
I can’t wait to get my quick connect kit
If it’s not a secret, did you get your quick connect as part of beta testing?
No, I also just got it, because it is shipped in China, so it is priority to arrive 
效率很高啊，我的2.0单喷的还没设计呢，要抓点紧了
