Sep 13 2021: Snapmaker2_V1.13.2
Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.
Changelog
Controller
New Features
- Add “M425” G-code for saving backlash parameters. (#126)
- Add remap 8-pin port feature for any axis. (#131)
- Support G-code execution result triage. (#139)
Bug Fixes
-
Fix a bug where home_offset will set to 0 when using “M501” G-code.(#133)
-
Fix type of 3dp nozzle temperature. (#134)
-
Fixed a bug where power loss data could not be saved circulatively.(#138)
Touchscreen
New Features
- Add Heated-Leveling feature for 3D Printing Module.
- Return G-code responses in console when Wi-Fi remote connected via Snapmaker Luban.
- Not all of the G-code responses were compatible for now. We will keep improving this feature in furture updates, please stay tune.
- Add Enclosure light auto turn on upon startup options.
- The option will be set as “Auto On” after upgrading from the previous version.
Bug Fixes
- Fix a bug where showing wrong connected access point when back from password page in Wi-Fi settings.
Improvement
- Optimize UI/UX for USB device detection.
- Improve Wi-Fi connection experience.
- Wi-Fi page will show up connection result while connecting.
Downloads
MD5: 52ef37ce21f141077297ef0a48c4586f
Notes
This firmware update is only compatible with Snapmaker 2.0.
To see your current firmware version, go to Settings > About Machine .
How to Update Firmware
- Via a USB flash drive
- Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
- Plug the drive into the Controller.
- On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin .
- Via Wi-Fi
- On the Touchscreen, tap Settings > Firmware Update .
- Read the changelog and download the firmware.
- After the firmware is downloaded, tap Update Now .