Origin is no longer at front left corner

Snapmaker 2.0 (3-in-1)
1

On Snapmaker A350T 3d printing. Trying to start a new print after switching out nozzle size and for some reason the print head is not starting at the lower left front corner. The print head seems to be about 120mm from the front of the build plate. I tried hitting HOME. I tried toggling the y position but it returns to the incorrect Home. Turned machine off and on.

It does not seem to be anything in the print file. I had started the print and was not happy with the “squish” so I adjusted z-height and next print started with incorrect origin.

Any thoughts for help on this?

2

Check if your settings regarding “Quick Swap Kit” and “Bracing-Kit” are setted correctly. It could be that the nozzle switch, reseted your settings on the machine. Hope that helps :slight_smile: