Well, almost perfect. It is within plus or minus .02mm or .0008". I’ve posted it to Thingiverse: [image] Indicator Mount by tonejaco This is a Dial Indicator mount for the side of the Snapmaker 2 print head. It can be used to check your bed level. A link to the Dial Indicator I got is i…

Actually it is called the platform. [image]

Yes so the only difference is the machined top, and a very small arrow on one corner of the casting. I mark mine front anyway with a pencil so I always get it around the same way as I m shimming it with copper tape.

I heard a rumor it’s tapped holes and not threaded inserts. My gut reaction is the threaded inserts were better because they were replaceable initially. However that turned out to be moot since it’s a custom machined part apparently that is not available for purchase. Guess it doesn’t matter. Alt…

It is inserts, I may have started the rumour by accident as the new bed actually has the inserts missing. Waiting on support now. Sorry Chris

hahaha… only this product i tell ya.

[image] Bed Mesh Leveling Video Guide - using latest Firmware 10x10 grid Snapmaker 2.0 i’ll try your method. Thanks for sharing Has anyone else tried this way?

I had made a post in github about some leveling concerns, and received a relatively thorough response about the future of bed leveling. At least, in terms of - they are working on it. [image] This was in response to my message: We were talking about this on the forum As we know, bed leveling de…

@MooseJuice I do get pretty good results from my calibration method with a cold bed. Yes a hot bed will alter things a little bit, but to play devils advocate, Im not sure it really affects things that much and be easily compensated for by a hgher flow rate or larger line width or even a raft. …

Absolutely not, Matter of factly snapmaker confirms this is a significant difference and is adding a pre-heat to the firmware. The plane of my print bed changes tremendously from the heat. The aluminum frame that the heated bed is mounted to is distorting. My bed will not function unless i use t…

The SM build sheet is not helping, when the sheet is hot I have noticed that I can push around air bubbles between the top layer and the steel

On achieving a perfect level

Snapmaker 2.0 (3-in-1)

Fauno January 13, 2021, 5:48pm 212

Has anyone else tried this way?

Topic		Replies	Views
SM2 Bed Leveling 101 Snapmaker 2.0 (3-in-1)	142	19436	January 25, 2023
On achieving a better leveling (With help from Snapmaker Devs) Snapmaker 2.0 (3-in-1)	41	4753	September 3, 2024
Leveling / First layer Problems Snapmaker2.0 Troubleshooting guides	39	3356	July 19, 2021
Bed Leveling - Revisited & Detailed Snapmaker 2.0 (3-in-1)	34	9609	July 29, 2024
Please help me with bed leveling first layer mess uneven Snapmaker 2.0 (3-in-1)	53	3477	January 7, 2023

On achieving a perfect level

Related topics