Odd repeatable print issue, please help

[xchrisd]

Hey the little pickles seems to me that the nozzle was dirty at the beginning or it is a bit too cold or hot.
May you print the temp tower to check your perfect filament temp?

Need ideas to correct printing issues I'm currently seeing

Your Printer Test seems for me to be too hot printed (Or to less cooled) .- I check my filament print temps with temp tower: thingiverse is busy now, or my browser is lazy, here is my gcode: Temp_Tower_0,4Nozzle_190-225GradC_30mm-s.gcode (1.3 MB) At the snapmaker original i “couldn´t” cool the print area, you should do some experimenting, especially at tiny print-parts. your testprint “ring” says to me, you are trying to print too much walls.- in simplify3d there is an option which is called…