My Snapmaker is not connecting via WiFi

There are days the computer connects easily with the SnapMaker 2.0 A350 and there are days it just won’t connect. It does not matter if I turn off/on the WiFi and/or the computer and/or the SM2.0. It just does not connect.

What advice can you give me to resolve this as it disables me to use the snapmaker on certain days.

When I have this issue I toggle to the com port and back to WiFi and it usually brings the WiFi live then. Sometimes I have to do this 2 or 3 times but I’ve always been successful getting the WiFi connected.

Another way is to transfer your gcode to a usb stick and plug that in.

Thank you for the advice. I will try this.