Hello! I’ve gone down a bit of a rabbit hole…and I’m relatively new to 3D printing as well as to the A350. I would love your advice. Because I am so new, I really can’t be sure what is causing the errors I am seeing. I have been attempting to work through different troubleshooting suggested in the…

Happy my experience can help someone else! I added a couple more links to things so you can review them. The filament guide is a must have! If you are also getting the enclosure, print the filament guide before covering with your enclosure or it will be tricky to install.

@justacarol Does the filiment guide keep the roll on the outside of the enclosure, or inside? I really like the idea of putting the roll inside the encloure. Which by the way I am getting. Looking real close at the Raspberry Pi configuration also. Any thoughts there?

@Jax3DTrains I unfortunately can’t speak about the Raspberry Pi configuration but I’m certain others here with more experience could assist with that. I’m still quite new with all of this. As for the filament guide, it appears to be for those of us that have the filament mounted on the outside of t…

Sharing visual progress. This is the first Benchy when I noticed I had issues: [image] This is Benchy with new filament and the first round of calibrations: [image] This is Benchy after complete machine tear down, cleaning, part replacements, recalibrations, switch to Cura, and slicing adjust…

[image] justacarol: This is Benchy after complete machine tear down, cleaning, part replacements, recalibrations, switch to Cura, and slicing adjustments. That’s quite the list of changes. I’m happy to hear you were able to make it through the gauntlet and finally get a good quality print. Th…

@justacarol What was the temp on the first Benchy? (white) I’m asking because the look, which most would call kind of melty, is the look I am after. Locomotive frames are done in cast steel, at leat the ones from around 1875, which is what I will be modeling. And that type of texture is what I am a…

@Jax3DTrains The white Benchy was done at 210 using the white PLA Snapmaker filament. Based on the progression of how things happened in my experience, that filament was also bad which caused that texturing. When I say “bad”, I don’t know what actually makes it that way but the filament was extremel…

You might be interested in some of the metal filled materials for patina [image] 3D Printers for Business, Education and STEM in Australia - Bilby3D 3D Printer and Scanner experts Bilby3D. Shops in Sydney, Brisbane, Melbourne and online Scroll down and have …

@pugs Do they have an Amazon store? I would hate to pay shipping from Au!

Melty on the left / Gappy on the right - no goldilocks to be found

Snapmaker 2.0 (3-in-1)

justacarol December 7, 2021, 2:10am 34

I am experiencing what @scyto has documented in another post and this is about as low as I can get the nozzle without causing other issues.

Topic		Replies	Views
Achieving a good first layer A350 Snapmaker 2.0 (3-in-1)	65	10983	January 15, 2022
How do I fix this printing issue? Snapmaker 2.0 (3-in-1)	48	2834	April 27, 2021
3D printing gone crazy Snapmaker 2.0 (3-in-1)	36	617	January 4, 2025
Leveling / First layer Problems Snapmaker2.0 Troubleshooting guides	39	3382	July 19, 2021
Please help me with bed leveling first layer mess uneven Snapmaker 2.0 (3-in-1)	53	3546	January 7, 2023

Melty on the left / Gappy on the right - no goldilocks to be found

Related topics