Hi guys, I’ve been playing around with the snap maker but and noticed that the filament on the left extruder specifically wasn’t extruding properly. I opened up the extruder module and found shavings of the filament near the gears and noticed my filament was damaged. The right extruder, however, s…

It might be, that your nozzle is clogged. Your pictures look similar to the ones in this Blog-Post. Maybe take a look if cleaning the nozzle and extruder might help. [image] 3D Printer Nozzle Jam: Main Causes and Cleaning Methods Hello, Maker! Did the nozzle jam ever happen to your 3D p…

I just had to clean them myself. Seems like there was still some filament left in the gear after switching materials. Just ordered some “cleaning filament” on Amazon and I hope this helps when changing colors.

I needed the wedge provided from snapmaker as workaround: [image] [First Batch Shipped Out] FAQs of Dual Extrusion 3D Printing Module for Snapmaker 2.0 Snapmaker 2.0 Hallo, @brewery.chump0x Klar teile ich es mit Dir / Euch. Anbei die STL und Auszüge aus der Mail vom Sup…

I am already using their wedge but I still see filament shavings in the machine, the wedge doesn’t seem to work for me.

The same symptoms appeared for me. I found that the nozzle is blocked only when printing with a specific filament, whether Artisan (Dual Nozzle) or Snaomaker 2 (Single Nozzle). That filament is Snapmaker’s PLA black . I believe that the quality of Snapmaker’s PLA black is likely poor. …

Left extruder damaging filament?

Artisan (3-in-1)

xchrisd April 13, 2023, 5:54pm 5

I needed the wedge provided from snapmaker as workaround:

Topic		Replies	Views
Dual Extruder - Left feeding gear issue Snapmaker 2.0 (3-in-1)	9	2537	April 14, 2023
Dual Extruders, but 1 not working? Snapmaker 2.0 (3-in-1)	2	61	February 14, 2026
Multiple printer issues that seem related Snapmaker 2.0 (3-in-1)	4	356	December 30, 2021
Filaments purchased from shop.snapmaker.com jammed inside the extruder too frequently Original (3-in-1)	14	1360	June 4, 2020
Filament is stuck - Dual Extruder Snapmaker 2.0 (3-in-1) Slicer_Profile	8	1540	July 18, 2023

Left extruder damaging filament?

Related topics