So I am trying to print a large detailed object with my 250. The file is 327mb. Unable to transfer wirelessly so I used the USB. Unable to get past 86% parsing. Then the system reset. Has anyone else experienced this as of yet?. I tried doing something else with the same results. Guessing the s…

With Snapmaker Luban. I can slice the model with Cura with no issues.

Thank you for trying Kerrida. Glad it’s not just me. Cura will slice it fine fine for me as well. So far I am still only able to load it to the machine at normal settings even using cura. High quality makes to large of a file for the current system which is disappointing.

@parachvte Is there any plan to increase file transfer size limitations? Also, it’s concerning that the file wouldn’t transfer even via USB…

@NilartPax I think there isn’t limitation on file transfer. Though you have roughly 2GB storage size on TS. File transfer plans as follows: (TS) Be able to move files between USB and internal storage. (TS) Show notification if storage is nearly full (but users should delete redundant files thems…

[image] Sewerjack: Thank you for trying Kerrida. Glad it’s not just me. Cura will slice it fine fine for me as well. So far I am still only able to load it to the machine at normal settings even using cura. High quality makes to large of a file for the current system which is disappointing. C…

[image] Kerrida: I tried it twice, and sadly it froze up both times at 100% Slicing. Ah well. It sounds to me like maybe it slices, and then the preview is crashing or failing in some manner?

Curious. I was trying to print the popular moon lamp on my A350, the 8 inch size. The file size was 329 MB, similar to yours, and also got stuck at 85% parsing loading of the USB stick. I tried going through WiFi to no success, and the gcode wouldn’t load to the workspace in Luban so I couldn’t try …

I tried to print a 7.5 mb file sliced in Simplify 3D from USB and it stopped loading at about 60% with a message it disconnect from machine - did I want to reconnect? I clicked the reconnect and the machine froze completely. Then I scaled the model to get about a a 4.9 mb file which also stopped l…

Some similar cases were reported that the files, which are generated from Simplify 3D, will cause some problems to the machine. The controller fails to parse the G-code file due to various reasons. You need to pay attention to the header codes and the ending codes of the G-code file. Edwin

Large File size issues

Software Snapmaker Luban

realfire July 9, 2020, 8:53pm 22

everything above 250
mb cant be even sliced by my current luban version. File transfer wifi doesnt work for 200mb filds

Luban hanging on large STL files

Topic		Replies	Views
Luban hanging on large STL files Snapmaker Luban	19	1928	May 23, 2024
Snapmaker Freezing at 50% of print Snapmaker 2.0 (3-in-1)	11	463	February 6, 2021
Touchscreen file processing limit Snapmaker 2.0 (3-in-1)	5	668	January 17, 2022
Problems sending 3DP files via WiFi Snapmaker 2.0 (3-in-1)	1	575	July 6, 2021
File size transfer/loading issues, errors and crashes (gcode larger than around 250Mb) Snapmaker 2.0 (3-in-1)	3	839	March 1, 2021

Large File size issues

Related topics