Having trouble - PLA Black

[xchrisd]

Print a temp tower and choose the value with best bridge + stringing.
If you like, under testing section is a gcode you could run but be cautious, don’t know anyone who tried it on a Artisan but it should work:

3d Print Guide_Walk Through

First of all, congratulations to a great machine! If you have any suggestions to this topic, feel free to send me a PM! You are new to 3d printing?- Be patient. The whole thing is very complex and just little adjustments will make the difference from failed to pretty prints. Start with easy, little things to create (1-3hours i would suggest) . Going to print the first time and then getting a 24h print on, maybe failes. There is a lot to learn, if it didn´t work for a long time, cool off a bi…