FYI How to turn off the door detection in Snapmakerjs

Please connect the machine with the PC and open Snapmakerjs.
Do as shown in the video:

1 Like

Edwin - apparently the mp4 is no longer available. Says it’s in “owner’s trash” Please revive it for me or send me e massage on how to fix the SM1 enclosure door switch issue. Thanks. Paul - calmes@earthlink.net

Sorry for the inconvenience. You can watch it now. https://drive.google.com/file/d/1Cgd-lHW4KlgeQuGDkt1pPMLfkWDQezyN/view?usp=sharing

Easiest solution. Only requires removing 3x small screws from holding the door end (containing the magnets) from the door panel. Leave the door panels open and place the door end on the enclosure frame where it would normally site when the door is closed. the magnets will hold the door end against the enclosure frame.